Does Brophy Camper Tie Downs # HSSF Fit 2018 Ford F-150 6-1/2 foot Bed

Question

Question:

Will the camper tie down HSSF work on a 2018 Ford f150. I have a 6 1/2 ft popup camper

asked by: Terry F

1

Helpful Expert Reply:

Yes the Brophy Camper Tie Downs part # HSSF do fit your 2018 Ford F-150 with a 6-1/2 foot camper.

expert reply by: Jameson C

1

Answer 1

We have spoken with Brophy in the past and for a Ford F-150 with aluminum body such as your 2017 model they recommend using the Brophy Clamp On Camper Tie-Downs part #HSSF. There won't be any issues with these tie downs and an aluminum bed so…

view full answer...

Answer 2

The Brophy Camper Hold Downs, #HSSF, should work well with your 2010 Ford F-150. I spoke with my contact at Brophy and she has not had any complaints of a fit issue since Ford changed the design in 2009. To be absolutely certain that these hold downs…

view full answer...

Answer 3

The Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 #HSSF and the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 #HSAB will be equally strong. I reached out to my contact at the…

view full answer...

Answer 4

The clamp-on syle tie downs that you referenced are not a confirmed fit for your truck. If your 2016 Ford F-150 with 6-1/2' bed does not have a running boards that extend under the bed, then the TorkLift #TLF2018-TLF3007 would be a perfect fit…

view full answer...

Answer 5

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 11

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Does Brophy Camper Tie Downs # HSSF Fit 2018 Ford F-150 6-1/2 foot Bed

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching