Can The 2-Wire RV Propane Gas and Carbon Monoxide Detector # RS34FR Be Mounted Vertically

Question

Question:

Can this unit be mounted vertically ? Thank you

asked by: Terry C

0

Expert Reply:

The 2-Wire RV Propane Gas and Carbon Monoxide Detector - 12 Volt - White # RS34FR can be mounted vertically if needed but most importantly should be installed no more than 18" from the floor so that it can accurately detect the amount of gas in your RV. Do not mount this detector within 12" of any opening windows, exterior doors, fans, vents, or areas with a draft. To continue, do not mount on exterior walls, within 24" of any cooking appliances, behind furniture or any areas that would block flow to the alarm, and on a wall controlled by a power line or to a circuit breaker.

expert reply by: Kevin C

0

Answer 1

Based on the picture you provided the Atwood RV Propane Gas Detector - 12 Volt - White #AT36720 would be an exact replacement for your current Atwood RV Propane Gas Detector.

view full answer...

Answer 2

Since the Atwood LP DOB 31013 is no longer available, your best option is to do a full replacement. I recommend going with the: -RV Propane Gas and Carbon Monoxide Detector #RS34FR for white, or the: -RV Propane Gas and Carbon Monoxide Detector…

view full answer...

Answer 3

The Timbren #TGMRTT35D are 5-9/16" tall.

view full answer...

Answer 4

I definitely recommend the Timbren springs over the Stableloads. I reached out to my contact at Timbren about the differences between the rear suspension models for your 2016 Chevrolet 3500 4WD and he said that the Timbren Rear Suspension…

view full answer...

Answer 5

The 2-Wire RV Propane Gas and Carbon Monoxide Detector #RS44FR can be mounted vertically if needed but most importantly should be installed no more than 18" from the floor so that it can accurately detect the amount of gas in your RV. Do…

view full answer...

Answer 6

On your 2019 LTV Motorhome, the Atwood 31011 (Discontinued) CO/Propane Detector beeping every couple hours while driving could be a couple different things. I would start with checking the battery to make sure it isn't getting too low. If it is…

view full answer...

Answer 7

Adding Timbren Rear Suspension Enhancement to your 2018 Chevrolet Silverado 2500 will help to eliminate the porposing or bucking you are experiencing when towing your 5th wheel trailer as they will add more support to the rear suspension of your…

view full answer...

Answer 8

Timbren rear-axle jounce spring kit #TGMRTT35D is intended for severe service vehicles such as tow trucks so for your towing/cargo application you will use kit #TGMRCK25D. This no-drill install is suitable for heavy-duty trucks like your 2500 whether…

view full answer...

Answer 9

Yes, a Timbren kit like the part #TGMRCK25D would be exactly what you'd need to beef up the rear suspension of your 2017 Chevrolet 3500HD Duramax when towing a fifth wheel trailer. This is a confirmed fit for your truck and will provide you with…

view full answer...

Answer 10

You can use the RV Propane Gas Detector #RS64FR to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 11

The RV Propane Gas Detector part #RS64FR is what I recommend using to replace the the Atwood RV Propane Gas Detector part 31013 (Discontinued). The mounting plate for this new detector will cover up any holes you had for the previous so it will be a…

view full answer...

Answer 12

The best fit and forget systems we have for your 2019 Chevrolet Silverado 2500HD are going to be between the Timbren Rear Suspension Enhancement System part #TGMRCK25D and the SumoSprings Rebel Custom Helper Springs part #SSR-203-47-2. These systems…

view full answer...

Can The 2-Wire RV Propane Gas and Carbon Monoxide Detector # RS34FR Be Mounted Vertically

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching