Can Base of B and W Companion be Swapped to Fit 2022 Ford F-350 OEM Rail Kit

Question

Question:

I have the campion non slider in my 2020 gmc 3500 oem prep, do they make just the base for a 2022 f-350 oem prep? Thanks

asked by: Mike

0

Expert Reply:

You can take the head off of your fixed Companion hitch for the GM rail kit and swap it on to the base part # BWRVB3305 and you'd essentially have the # BWRVK3305 which fits the OEM rail kit of your 2022 Ford F-350 and has a 25k capacity.

You could do the same with the part # BWRVB3300 if you wanted the 20k capacity instead which would give you a # BWRVK3300.

expert reply by: Jameson C

0

Answer 1

In order to use a B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter part #BWRVK3500 on a 2022 Ford F-350 with factory prep package you'd simply need a new base, the Replacement Base for B&W Companion OEM 5th Wheel…

view full answer...

Answer 2

Yes, the B and W Companion Base part number #BWRVB3300 that you referenced is the correct base for the 2023 Ford F-350 that has the OEM rail kit.

view full answer...

Answer 3

Yes, the Base for B&W Companion OEM 5th Wheel Trailer Hitch for Ford Super Duty part #BWRVB3305 will fit your 2019 Ford F-350 with the 6-1/2' bed. There is no difference between the prep package on a 6-1/2' or 8' bed.…

view full answer...

Answer 4

The B and W Companion Hitch for Ford Factory rail kits part #BWRVK3300 that you are considering has a height range of 16-3/4" - 18-3/4" so it could easily fit under a tonneau cover that measures 18-3/4 inches from the truck bed…

view full answer...

Answer 5

For just the base of a B and W Companion fifth wheel hitch that fits the OEM pucks of the 2024 GMC Sierra 2500 you'd want the part #BWRVB3710 as this is the base of the #BWRVK3710 which is correct fit for your 2024 GMC Sierra 2500.

view full answer...

Answer 6

Yes, the B&W Companion #BWRVK3300 fits 2011 and newer Ford Super Duty trucks with factory-installed towing prep package. This will fit the factory puck system in your 2023 Ford F-250.

view full answer...

Answer 7

There is one 5th wheel hitch that fits your 2021 Ford F-250 Super Duty with the factory puck system that really does stand above the rest, which is the B&W Companion OEM 5th Wheel Trailer Hitch. The reason why the Companion is the best is because…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 11

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 12

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...