Do you Recommend the Curt A25 or the B&W Companion for My 2021 GMC Sierra 3500 with OEM Prep?

Question

Question:

I am trying to decide with the Curt A25 and the B&W Companion 25k hitch for my new 2021 GMC Sierra 3500 long bed with oem prep

asked by: Jane

0

Expert Reply:

Congrats on the new truck! The B&W OEM Companion 25k # BWRVK3715 and the Curt A25 # C24FR for the factory pucks on your 2021 GMC Sierra 3500 represent the very peak of fixed 5th wheel hitches on the market.

Between the two options though I do recommend the B&W Companion # BWRVK3715 and I will go over my reasoning below.

Both hitches feature a dual jaw design that's built to provide a really secure connection with the trailer as well as a smooth ride during travel. The B&W Companion though, instead of the interlocking system that Curt has, uses thicker 1" jaws that just do a better job of completely surrounding the king pin to eliminate any movement at the connection point. This creates an even smoother ride without any rattle/noise coming from behind you on the road.

The B&W Companion also has a unique cam-action latching handle that's well-known for allowing a simple release of the hitch, even when you're on unlevel ground. If you've ever arrived at a campsite with a 5th wheel trailer before you know exactly how frustrating a binding handle can be. The legs on the Companion also offer an easier attachment to the pucks on your Sierra than any other 5th wheel hitch, including the Curt A25.

Lastly, the B&W Companion is made right here in the USA. It features a robust gray powder coated steel construction that's absolutely built to last and there's no reason this shouldn't be the last hitch you purchase. I have attached a short video review that you can check out as well.

expert reply by: Bob C

0

Answer 1

Since you are looking for a fifth wheel hitch with at least a 25k capacity your best option would be the Curt A25 5th Wheel Trailer Hitch for Chevy/GMC Towing Prep Package #C24FR. This has the 25,000 lb capacity you want for your 2022 Chevy Silverado…

view full answer...

Answer 2

The main difference between the Curt A-Series part #C24FR and Q-Series part #C97FR is the head and jaw design. The A-Series has dual interlocking jaws which form a much tighter grip on the kingpin than just a standard set that butt up at the end like…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Beds shorter than 8 foot do commonly need a slider hitch David, but a lot of modern fifth wheel trailers are now made with tapered noses to help and in a lot of cases a slider isn't required. So if the trailer you plan to tow has a tapered nose…

view full answer...

Answer 6

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 7

Hey Steve, so between the Curt #C16265 and the Pullrite #PUL36ZR I'd go wit the Curt but not the Q25. I'd go with the A25 #C24FR, which is basically the same thing as the Q25 but does not require the #C88KR adapter. Only the Curt is going to…

view full answer...

Answer 8

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the B&W Companion #BWRVK3710. So I highly recommend instead using the 5th Airborne Custom Wedge for B&W Fifth…

view full answer...

Answer 11

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

view full answer...

Answer 12

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Do you Recommend the Curt A25 or the B&W Companion for My 2021 GMC Sierra 3500 with OEM Prep?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching