What Tire Chains do You Recommend for My 2020 Subaru Outback with 225/60-18 Tires?

Question

Question:

I need chains for a 2020 Subaru XT, 225/60/R18. Owners manual states not enough clearance for chains salesman tells me that cables are ok. What do you recommend for this model and tire size. Thank you

asked by: Lee G

0

Expert Reply:

You are correct in saying that the owner's manual for your 2020 Subaru Outback states that you should not use tire chains because of the lack of clearance. The reason why manufacturers say this is to avoid any liability/warranty claims that may result from damage from tire chains.

With that being said, we do offer tire chains that require minimal clearance to decrease the probability of damage on your 225/60-18 tires. Cables like the Glacier Cable Snow Tire Chains - 1 Pair # PW1046 only require 15mm of clearance between the inner tire sidewall and the wheel well wall. If you are wanting a great pair of tire chains that require a small amount of clearance, a great fit is the Titan Chain Alloy Snow Tire Chains - Diamond Pattern # TC1555. The Titan Chain Allow chains have an inner circular covering that helps keep the chains in place to avoid any contact with struts or other components in your wheel well. These chains also require 15mm of clearance.

For both of these options, I recommend the Glacier Multi-Arm Rubber Adjusters - Light-Truck Chains - 15" to 18" Rims # PW105 to ensure that you will continuous tension pulling on the chains. This will give you a proper fit during travel.

I went ahead and attached pictures of the inner sidewalls as well as videos of these options to provide you a better perspective.

expert reply by: Bob C

0

Glacier Cable Snow Tire Chains - 1 Pair # PW1046
(click to enlarge)

Titan Chain Alloy Snow Tire Chains - Diamond Pattern # TC1555
(click to enlarge)

Answer 1

So the answer is yes, with your 2-1/2 inch receiver you will still be able to use the Thule T2 Pro XTR Bike Rack #TH83JV. You are correct, however, that the your standard hitch reducer sleeve isn't going to work, so what you will need instead…

view full answer...

Answer 2

According to the owner's manual for your 2018 Subaru Outback, tire chains shouldn't be used because of limited clearance to the inside of the wheels, however using Class S cable chains like #PW1042 on the front wheels only would be…

view full answer...

Answer 3

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 4

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 5

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 6

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 9

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 10

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 11

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...