Replacement Leaf Spring to Replace Spring that Measures 21-3/8 inch

Question

Question:

I need a leaf spring for my boat trailer, but the eye to eye measurement is 21 3/8 can you help?

asked by: Ed T

0

Expert Reply:

We have a 21 inch long Dexter trailer leaf spring with part # 072-017-00 which would work great for you assuming the axle capacity matches what this was designed for. This leaf spring is for 2,000 lb trailer axles.

As leaf springs break in/wear out they tend to stretch so yours being 21-3/8 inch would match great with this new spring that is 21 inches.

expert reply by: Jameson C

0

Answer 1

When measuring a trailer leaf spring to pick out a replacement you'd need to measure from spring eye center to spring eye center with no weight on the spring. For example, the Dexter spring part #072-017-00 would be correct replacement if…

view full answer...

Answer 2

I was able to do some research and your leaf springs measure 21" from center to center. The replacement springs you will need are the Dexter Axle Double Eye Leaf Spring for 2,000-lb Trailer Axles - 21" Long, part #072-017-00 These…

view full answer...

Answer 3

We definitely have a few options available for a 3,500 pound Dexter axle. That being said, you will need to measure your current leaf springs to see which one will fit. This should be done going from the center of one eye to the center of the other…

view full answer...

Answer 4

Hey Roy, The only U-bolt kit we currently only offer for 1-1/2" square axles is part #CE23102, which only has a 3-3/8" length so it likely wouldn't be the best option for you. Instead you'll want to order the 1-1/2" Square…

view full answer...

Answer 5

Hey Philip so while we don't carry the exact spring you are looking for it does match the specs of the #e59SR so this would be a great solution. It's correct length at 23-1/8 inches and is for a 3,500 lb trailer axle like you have as well.

view full answer...

Answer 6

Hey Jaime, yes you can replace your 25-1/4 inch 3,500 lb axle leaf springs with a 5k rated axle spring like the part #e44SR. This will increase the suspension's weight capacity and might make the ride quality a little rougher but it would fit and…

view full answer...

Answer 7

Hey Kevin thanks for your question. There is not much downside to going with the 5,000 lb springs instead of the 3,500 lb. A higher rated spring may make the ride a bit more "chunky" at times, since the spring would not flex as easily.…

view full answer...

Answer 8

It is possible to replace your 62" long axle with a longer one. Our next size up is going to be a 72" long 2K rated axle like part #e32GR. The axle being 72" across measured from hub-face to hub-face. This axle comes with 5 on…

view full answer...

Answer 9

The Dexter Double Eye Leaf Spring #072-017-00 you mentioned is intended to be used with a 2,000 lb axle. It can be a suitable replacement for your 2,200 lb axle, as long as the gross trailer weight does not exceed 2,000 lbs. You will also want to…

view full answer...

Answer 10

Biggest difference is how they connect to the tow vehicle. The Alpha part #BX7380 slides into a hitch opening and the Acclaim #BX4330 connects to a hitch ball like a trailer does. The preferred method is the Alpha which allows you to fold the tow bar…

view full answer...

Answer 11

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…

view full answer...

Replacement Leaf Spring to Replace Spring that Measures 21-3/8 inch

Product Page this Question was Asked From

Continue Researching