bing tracking image
Q & A Icon

How to Adjust the Tekonsha Prodigy P2 Trailer Brake Controller  

Question:

how do u adjust the brake controller

1

Helpful Expert Reply:

Adjusting the P2, # 90885, is easy. Once you have it mounted according to the instructions, linked for reference, you will beginning setting up the power output. To do this take the truck and trailer to a flat level surface. Set the controller to 6 with the boost off. Roll the adjustment wheel on the left up or forward (towards the front of the vehicle) to get it to 6.

Then you will drive about 20 miles per hour nd fully apply the manual override lever at the bottom (do not use the brake pedal). If the brakes lock up adjust the power down by turning the wheel the other way. If they do not lock up, turn the power up. Keep doing this test until you get the brakes to the point just under lock up.

In addition to the instructions, I have also linked a video review of the P2 and a link to our FAQ article on brake controllers.

expert reply by:
1
Michael H

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>

^

Recently Viewed Products

About Us
photos and videos
1,056,204
Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570
Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511
Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+
Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
78
Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357
Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.