4-Way Mounting Bracket Adapter for Square Tube Curt Hitch C13065

Question

Question:

Just looking for a mounting bracket that can mount to this hitch. I think I found one, but it looks like it only mounts to a round style hitch. Can you help? Thanks.

asked by: James

0

Expert Reply:

One easy solution for a 4-way mounting bracket that can attach to a square tube hitch like the # C13065 that you referenced is the part # 18144. For a no-drill application, you can add either a short bracket # 18140 or a long bracket # 18136. I have attached some videos of these products to help you choose the parts that you need.

expert reply by: Jameson C

0

Answer 1

Hey Kyle, we have the Curt hitch part #C13065 that fits your 2018 Jeep Grand Cherokee Altitude which would be a really great option. It has great towing capacities and is mostly hidden.

view full answer...

Answer 2

Yes, the Curt #C13065 will fit your 2016 Jeep Grand Cherokee Summit. This fits all models except the SRT, SRT8, TrackHawk, and diesel. The hitch features a concealed cross tube, bolt-on installation, and comes with a limited lifetime warranty. If…

view full answer...

Answer 3

For your 2019 Jeep Grand Cherokee Limited, I'd recommend the Curt #C13065 which fits 2019 Grand Cherokee models EXCEPT the SRT, SRT8, TrackHawk, and Diesel. The #C13065 is a semi-concealed hitch, the crossbar is concealed behind the bumper…

view full answer...

Answer 4

Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors Item #C55774 is compatible with the Curt trailer hitch #C13065 but the harness is meant to fit a 2014 Jeep Grand Cherokee that came with a factory…

view full answer...

Answer 5

There is a trailer hitch receiver that fits your 2023 Ford Transit T250, which is the following part number: - Draw-Tite Max-Frame Trailer Hitch Receiver #75912 This will give you a bolt-on hitch that has a 5,000 lb towing capacity and 750 lb tongue…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 9

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 10

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 11

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 12

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...