Recommended Towing Mirrors For for 2022 Jeep Gladiator

Question

Question:

I would like some towing mirrors for my 2022 Jeep Gladiator.

asked by: Steve J

0

Expert Reply:

I have a great set of towing mirrors for your 2022 Jeep Gladiator. I recommend the CIPA Universal Dual Lens Towing Mirrors item # 11953-2. These universal-fit mirrors clip onto your factory side-view mirrors to extend your lines of sight while you're towing. The 2 fully adjustable faces of each mirror let you customize your view. 2 Straps hold each mirror in place. The overall length is 14-1/2", the mirror face dimensions are 7" wide x 5-1/2" tall, and the straps are 13" long. I have attached a review video of these mirrors being installed on a 2020 Jeep Gladiator.

expert reply by: Jerred H

0

Answer 1

For your 2020 Jeep Gladiator we have the CIPA tow mirrors part #11953-2 which will fit and work great. These install easily, mount securely, and since they have a dual view mirror on either side gives you the best visibility overall. We had a chance…

view full answer...

Answer 2

When installing towing mirrors on your 2021 Jeep Gladiator I recommend The K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side #KS39NQ. These are a snap on mirror that snap over the backs of your factory side-view…

view full answer...

Answer 3

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

On the Jeep Wrangler and Jeep Truck models the steering wheel does not actually lock with the ignition in the off position, it just has a loss of power steering-which is likely what you're experiencing. Jeep removed the steering wheel lock from…

view full answer...

Answer 9

There is a great option for a tire pressure monitoring system on your 35' travel trailer, although the TireMinder TPMS for Dual Axle Trailers #TPMS-TRAILER is only designed to work on trailers that are up to 25' in length and would not be the…

view full answer...

Answer 10

Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have so I…

view full answer...

Answer 11

While we don't currently offer the EB01-155 or EB01-150 we do offer the Dexter Electric Brake Kit #23-450-451, which has matching dimensions, capacity, and are self-adjusting.

view full answer...

Answer 12

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...