Will the Fit Kit # DK427H Fit on My 2018 Ford F-150 with 2500 Series Feet?

Question

Question:

To use the RRVA150B-2, I can use the same base(DS1375B) and legs DK427?

asked by: Tim

0

Expert Reply:

If you are looking to use the your Rhino-Rack Roof Rack 2500 DS1375B on your 2018 Ford F-150 (supercrew), you need to have the Custom DK Fit Kit for 2 Rhino-Rack 2500 Series Roof Rack Legs # DK427 (which comes with 2 sets) for you to fit the feet onto the naked roof of the F-150. This kit is different fit kit than the one required for the 2017 Nissan Frontier.

If you are looking for longer crossbars, the longest bars you will be able to use with the 2500 feet are 59 inches, like the Rhino-Rack Vortex Aero Crossbars # RRVA150B-2. The reason why you will not be able to have longer crossbars is because the vortex aero and euro bars have limited bottom channels. When you increase the length of the crossbars, this forces the feet to be attached further inward toward the center of the crossbar. It is for this reason why you will not be able to fit longer crossbars with a Rhino-Rack System on your F-150.

expert reply by: Bob C

0

Tim

1/1/0001

To use the RRVA150B-2, I can use the same base(DS1375B) and legs DK427?

Reply

Bob C.

10/27/2021

Yes - to use the Vortex Aero Crossbars # RRVA150B-2, those will be compatible with the same 2500 legs that come on the # DS1375B. The crossbars will also work with the Fit Kit # DK427.

Reply

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 4

Yes, the Curt Custom Fifth Wheel Installation Kit for Ford #C93WR will work just fine with the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 7

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 8

Thanks for reaching out, Steve! Both Air Lift LoadLifter 5000 kits, parts #AL47PD and #AL82WQ, fit a 2021 Ford F-150 4WD. The only difference is whether your truck has the CCD (Continuously Controlled Dampening)/Onboard Scales, or the PowerBoost…

view full answer...

Answer 9

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 10

Both of the kits you mentioned are a fit for your 2016 Ford F-150. The difference is that the part #TFR1504E has a 6,000 lb capacity and the part #TFRTT1504E has a 7,000 lb capacity. You would want to go with the lower rated spring as it will be a…

view full answer...

Answer 11

In order to attach the Rhino-Rack Pioneer Platform to a set of crossbars you would need the kit that comes with universal mounts which is part #RR42114BF for 48" long x 37" wide or part #RR42115BF for 58" long x 47" wide. This…

view full answer...

Answer 12

Hey Alex, it sounds like you are looking for just the tracks of the Rhino Rack camper shell roof rack kit #Y02-480B which we do offer with the part #RTC16.

view full answer...

Will the Fit Kit # DK427H Fit on My 2018 Ford F-150 with 2500 Series Feet?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching