What Ladder Rack Do You Recommend for My RetraxPRO XR Cover on My 2021 Ford F-250?

Question

Question:

What ladder rack will work with my RetraxPro XR on my 2021 Ford F-250? I have a 6-3/4 ft. bed.

asked by: Brett

0

Expert Reply:

As far as ladder racks that are compatible with your RetraxPRO XR # RTT-80383 on your 2021 Ford F-250, for ultimate adjustability and quality, I recommend the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack - Aluminum # Y01151-58 along with the Tonneau Cover Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Bed Ladder Racks # Y01155. With the OverHaul HD, you will be able to adjust the height from 19-30 inches above the truck's bed rails. Apart from securing cargo, you will be able to mount compatible accessories such as bike racks, kayak carriers, cargo boxes, and roof top tents. For extra add-ons, you can purchase the Load Stops # Y01161 or Eye Bolts # Y01162. If you need securing straps, I recommend the SmartStraps Ratchet Tie-Down Straps w/ S-Hooks - 1" x 10' # 348155

expert reply by: Bob C

0

Answer 1

Yes the Yakima Overhaul HD Ladder Rack part #Y01151-58 that you referenced does come with 68 inch long crossbars.

view full answer...

Answer 2

I have a solution for you. In order for the Xporter Pro Shift #TH54RR to work on your 2021 Toyota Tundra is if you pair the Pro Shift with the Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks #TH24RV. This is how you will be able to…

view full answer...

Answer 3

I went ahead and confirmed with my contact at Yakima that the Eye Bolts for Yakima HD Bar, JetStream, FlushBar, and RailBar Crossbars - 250 lbs - Qty 2 #Y01162 should work with your Retrax XT tonneau cover. Even though she could not confirm for sure,…

view full answer...

Answer 4

The Tie-Down Kit for Truck Hero Elevate Rack System part #TH52FR will be a great way to add tie down points to your Retrax Pro Xr Tonneau Cover like part #RTT-80383. These are designed to be slid into the track and fastened down to provide the…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

A tonneau cover like the Retrax PRO XR with Trax Rails #RTT-80245 sits on top of the bed rails of your 2019 Ram 1500. This tonneau has T-slots that sit on the outer part of the Trax rails, which is what the Yakima Overhaul HD with 58" long bars…

view full answer...

Answer 7

There are a couple of accessories for the Truck Hero Elevate Rack System part #TH92FR currently available like the Tie-Down Kit for Truck Hero Elevate Rack System - Qty 4 part #TH52FR this will give you 4 tie downs that can be put on the base sliding…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 12

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...