Availability of MORryde Step Above with Strut Assembly STP214

Question

Question:

I trying to figure out what MORryde Step Above with Strut Assembly I need. According to MORryde I need STP-212 4 Step and STP-214 Strut Assembly. Looking on your site, I can only find the etrailer product number. Using the MORryde product number, what are the etrailer part number?

asked by: Bryan R

0

Expert Reply:

Based on what MORryde told you you'd need of the STP-214 you'd need our part number # MR85RR. The STP-212 is the version of this step that does not have the strut assist so you'd want the # MR85RR.

expert reply by: Jameson C

0

Answer 1

The difference is between just the MORryde Locking RV Storage Box #MR43RR and when you add the brackets at their widest setting. Just the box measures 25-3/4" but when you add the mounting brackets is when you'll see that 27-3/4" width…

view full answer...

Answer 2

The overall height of the MORryde StepAbove part #MR85RR above where it mounts to the door frame is 47-3/4 inches which would be the same amount of distance you'd need between the side of your RV and anything to the side of it to allow the steps…

view full answer...

Answer 3

The depth of the MORryde StepAbove Strut Assist Fold-Down Step #MR85RR is 12-5/16 inches when it is in the up and folded in position. Basically it's how far the steps would take up inside the RV.

view full answer...

Answer 4

Yes, the MORryde StepAbove RV Steps #MR28RR will work the same way as the version #MR85RR that has the strut assist. The only difference is that you either have a totally manual lift or you get the strut assist to make moving the steps up and down…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

Hey Beatrice, To find the right fit for your trailer's suspension you'll need to take a quick measurement of your current shackle straps. You'll need to measure from the center of one bolt hole to the center of the other bolt hole. The…

view full answer...

Answer 11

Hey Dave, the MORryde upgraded shackle kit part #MR76ZR that you referenced is compatible with your 2020 Grand Design 2670MK and the Lippert Road Armor equalizers.

view full answer...

Answer 12

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Availability of MORryde Step Above with Strut Assembly STP214

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching