Distance From Receiver Tube To Ground On Draw-Tite Hitch for 2016 Nissan Frontier

Question

Question:

What is the distance between the bottom of receiver opening and the ground when installed on a 2016-17 Nissan Frontier?

asked by: Scooter

0

Expert Reply:

In regards to the Draw-Tite Front Mount Trailer Hitch Receiver part # 65075 which is a fit for a 2016 Nissan Frontier, the distance from the ground to the bottom of the receiver tube opening is around 9-1/2" but this can vary for each application due to tire size, suspension, and load variances.

expert reply by: Conner L

0

Answer 1

The Draw-Tite front-mount hitch #65075 is a confirmed fit on your 2017 Nissan Frontier. From the tops of the frame brackets that contact the frame down to the bottom of the receiver tube the dimension is 6-inches according to my Draw-Tite contact.…

view full answer...

Answer 2

Yes, you will need to remove the center air dam on your 2015 Nissan Frontier to install front mount hitch #65075. Nothing should have to be modified though and if you even take the hitch off you could put the air dam back into place.

view full answer...

Answer 3

The Draw-Tite Front Mount Trailer Hitch Receiver part #65075 is a fit for a 2010 Nissan Frontier and will require either removal or modifications to the center air dam trim piece or skid plate if present. I have attached a photo for you that shows…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

The absolute best cushioned equalizer that fits the dimensions you mentioned having would be the MORryde ALLTREK 4000 part #MR89DR as this is only option to provide vertical and horizontal cushioning. This would make a big difference and you'd be…

view full answer...

Answer 9

Trailer running lights not working with certain Nissan vehicles is a common problem with an easy fix. There is a relay for the trailer running light circuit that is located in the fuse box (in the cab). If that relay is missing or no longer functions…

view full answer...

Answer 10

I am happy to verify for you that your 2023 Nissan Frontier Pro 4X is 100% compatible with the Draw-Tite front hitch that fits, which is the following part number: - Draw-Tite Front Mount Trailer Hitch Receiver #65075 So you will have no issues…

view full answer...

Answer 11

The Draw-Tite Front Mount Trailer Hitch Receiver #65076 will fit your 2023 Ford F-350 dually. It features a bolt-on installation and has a 2" receiver. The hitch has a 9,000 lb line pull, 500 lb vertical load, and 5,000 lb gross trailer weight.…

view full answer...