Bike Rack for 2021 Mazda CX-30 with Curt 1-1/4 inch Hitch Installed

Question

Question:

What bike rack. For 2bikes do you recommend for the above configuration. I see that the curt platform rack is listed as class 2 and requires a strap. Concerned about scratching my car and putting too much stress on the plastic brake light on top of the tailgate. Please advise. Thanks

asked by: Wrichter

0

Expert Reply:

For your 2021 Mazda CX-30 that has the Curt hitch # C49CR installed I really like the Swagman XTC2 part # S64670 for a really solid bike rack that is also a great value. This would not require the use of a stabilizer strap either.

expert reply by: Jameson C

0

Answer 1

The distance from the center of the hitch pin hole to the end of the receiver on the #C49CR is approximately 2" and the distance to the end of the bumper is 4". Unfortunately, the shank really isn't a concern for the GuideRail #RKY47ZR…

view full answer...

Answer 2

I'd be happy to help out! The perfect bike rack for your situation is the Hollywood Racks Destination: - Hollywood Racks Destination Bike Rack #HLY94FR This is honestly one of the most underrated bike racks that we carry, but it fits most…

view full answer...

Answer 3

I have another option for you but since the Hollywood Racks Destination Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount #HLY94FR does not tilt you would have to remove your bikes and fold down the mast to open the rear hatch on…

view full answer...

Answer 4

I do have a solution for you but the only trailer hitch options we offer for a 2023 Mazda CX-30 are class 1, 1-1/4" like the Curt Trailer Hitch Receiver part #C49CR which is what I recommend. That said, as you mentioned you can use a 1-1/4"…

view full answer...

Answer 5

There is a 1-1/4" trailer hitch receiver that fits your 2021 Mazda CX-30, and the best option is one from Curt: - Curt Trailer Hitch Receiver #C49CR The reason to go with the Curt #C49CR on your '21 CX-30 is because it has the best ground…

view full answer...

Answer 6

Yes, your 2021 Mazda CX-30 is compatible with the 2-bike version of the Hollywood Destination, the Hollywood Racks Destination Bike Rack for 2 Bikes #HLY94FR. Then for a trailer hitch on your '21 CX-30 you would need the Curt Trailer Hitch…

view full answer...

Answer 7

I recommend going with the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" #EH55VR. It has a 2 inch receiver that will be able to take any accessory and gives you the option to pull a trailer if the need ever comes up in the…

view full answer...

Answer 8

The trailer hitch that I recommend for your 2022 Mazda CX-30 is the Curt Trailer Hitch Receiver #C49CR. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a Class I, 1-1/4" hitch receiver for hitch…

view full answer...

Answer 9

If you are mounting any women's, children's or alternative frame bikes without the top horizontal cross tube, it can be very difficult to secure your bike to a bike rack. I highly recommend, if you are carrying a women's bike without the…

view full answer...

Answer 10

The Hollywood Racks Trail Rider part #HR200Z has a solid amount of clearance between its hitch pin hole and nearest wheel hoop at 12-1/8 inches and is priced great as well.

view full answer...

Answer 11

The Curt Trailer Hitch Receiver #C49CR does not require the removal of the bottom bracket attachment during installation. Your description of the installation is also accurate.

view full answer...

Answer 12

The Curt Trailer Hitch Receiver part #C49CR which is a fit for a 2021 Mazda CX-30 does not require any drilling for installation. You do need to enlarge access holes which basically means opening up pre-existing holes slightly more so the hardware…

view full answer...

Bike Rack for 2021 Mazda CX-30 with Curt 1-1/4 inch Hitch Installed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching