Best Trailer Brake Controller To Install With Tekonsha Wiring Harness On a 2015 Nissan Pathfinder

Question

Question:

Does this wiring harness include brake controller or is a separate controller needed? If so, what is the part # for that. Have a 2015 Nissan Pathfinder.

asked by: Todd K

0

Expert Reply:

The Tekonhsa T-One Vehicle Wiring Harness # 118273 for the factory tow package on your 2015 Nissan Pathfinder does not include a brake controller.

I recommend the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 for your Pathfinder. This controller will require a Tekonsha Plug-In Wiring Adapter # 3050-P to connect to the factory connector located under your dash. This is a proportional brake controller with a customizable LCD screen and it has diagnostics built in to tell you what to check if there is a problem with your trailer brakes.

If you prefer a smaller brake controller that does not take up much space the Redarc Tow-Pro Liberty Brake Controller # RED24FR will be a better choice for you. This will require their Plug-and-Play Wiring Harness # RED39FR to connect to the factory connector under your dash.

expert reply by: Bud M

0

Answer 1

If the incline is slight and the gravel isn't super deep the Trailer Valet XL part #TVXL25 would work. But if you have a steep driveway and/or deep gravel the wheels of the Valet are going to spin. In the video I attached a link to we show…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 5

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 6

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 7

For your 2024 Nissan Frontier I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR. I like the Liberty because it is simple, reliable, and looks great in any vehicle. The main unit installs behind the dash, so only the control knob will…

view full answer...

Answer 8

Sure thing, I will go ahead and list out what you need for your 2023 Kia Sportage to add a 7-way for a brake controller so you can tow with the Curt Trailer Hitch Receiver #C94WR: - T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer Connector…

view full answer...

Answer 9

From what I could find, it looks like the plug for a trailer brake controller on your 2023 Nissan Frontier is located in the same location as the 2022 model year. That is behind the side panel by the OBD connector and is likely pushed back into the…

view full answer...

Answer 10

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Answer 11

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...

Answer 12

We have not had the opportunity to do a brake controller installation on a 2023 Nissan Frontier yet. But if the plug is located in the same place as the 2022 model year, then the plug will be tucked behind the kick plate located to the left of the…

view full answer...

Best Trailer Brake Controller To Install With Tekonsha Wiring Harness On a 2015 Nissan Pathfinder

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching