Does Draw Tite Hitch 75699 Fit 2021 Jeep Grand Cherokee Limited

Question

Question:

Does this hitch for the 2021 Grand CHerokee also fit the Limited models?

asked by: Paul

0

Expert Reply:

Yes the Draw Tite Hitch part # 75699 that you referenced does fit the Limited models of the 2021 Jeep Grand Cherokee as well.

I attached an install video for this for you to check out as well.

expert reply by: Jameson C

0

Answer 1

If you check out the installation instructions linked to this page for the Draw-Tite Max-Frame Trailer Hitch Receiver #75699 that you referenced you will see the correct torque specs for the M14 bolts that already exists on your 2011 Jeep Grand…

view full answer...

Answer 2

For your 2020 Jeep Grand Cherokee without the factory tow package I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118727. It's custom made for your Grand Cherokee and will give you all the required lights to…

view full answer...

Answer 3

The 4-way trailer wiring harness that I recommend for your 2021 Jeep Grand Cherokee without tow package is going to be the T-One Vehicle Wiring Harness #118727. The T-One connector plugs into your vehicle's wiring harness, which is located…

view full answer...

Answer 4

A wiring harness that will fit the bill for your 2020 Jeep Grand Cherokee is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118727. This wiring will provide that 4 way connection you need to power your bass boat trailer light…

view full answer...

Answer 5

The Tekonsha harness part #118727 is the better option for your 2017 Jeep Grand Cherokee over the Curt #C62VR. The Tekonsha has a higher amperage rating so it will be more resistant to damage from an accidental short and also has a reputation for…

view full answer...

Answer 6

For your 2018 Jeep Grand Cherokee I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #75699. This is the only hitch available for your vehicle that features a hidden crosstube design where only the 2 inch receiver is visible behind the…

view full answer...

Answer 7

Yes the Draw Tite hitch part #75699 is the best option for a mostly hidden trailer hitch that fits your 2020 Jeep Grand Cherokee Limited.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...