How Do I Install the Curt T-Connecter # C56434 On My 2021 Toyota RAV4 Hybrid?
Question:
How do I install the Curt T-Connector on my 2021 Toyota RAV4 Hybrid?
asked by: Julie
Expert Reply:
In order to install the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56434 on your 2021 Toyota RAV4 Hybrid, the first thing you need to do is disconnect the negative terminal from the battery. After this step, you need to remove any carpeting and scuff panel from the trunk. Next, you will need to Locate the push fasteners on the top of the lower sidewall trim. Using a small flathead screwdriver, release the push fastener lock and pull out. Repeat this process on the passenger side.
Once the push fastener is removed from both sides, you will need to remove the trim from the driver's side. This will expose the tail light wiring harness. You will then insert the custom wiring end with yellow wire between the separated connectors. With the black double-sided tape, attach the converter box to a flat surface inside the vehicle. After you are done with this step, you will need to route the custom wiring end with the green
wire to the passenger side behind the removed scuff panels. You will use the passenger tail light wiring harness for this part of the process.
The final thing you need to do is route the black power wire from the positive stake of the battery terminal. I went ahead and included a diagram of how to route the black wire as well as the other wires involved.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Video: EcoHitch Hidden Trailer Hitch Receiver Installation - 2023 Toyota RAV4
- Shop: EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Interaction with E-Track
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Brake Controller
- Shop: Hopkins Knockout Adapter for 4-Way Flat Trailer Connector
- Q&A: Curt Echo Says Trailer 7-Way Disconnected But it Isn't
- Q&A: Can Curt Echo Under-Dash be Hardwired to 2024 Kia Telluride
- Shop: Valterra Electrical Cable Hatch for RVs - 4-5/16" Diameter - Black
- Video: etrailer.com Trailer Hitch Installation - 2018 Toyota Sienna
- Search Results: hm48605
- Article: Rust Prevention
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Video: etrailer Horizontal E-Track Review
- Video: Hopkins Wiring - Trailer Connectors - HM47605 Review
- Video: Curt Trailer Hitch Installation - 2023 Toyota RAV4
- Search Results: 4 way flat trailer connector
- Q&A: How To Add Shelves to Enclosed Cargo Trailer
- Search Results: vent
- Video: Valterra RV Wiring - Cable Hatch - A10-2140BKVP Review
- Search Results: c51515
- Search Results: c27jr
- Search Results: wireless brake controller
- Search Results: etbc7
- Shop: Towing Mirrors
- Shop: Suspension Enhancement