Which Adjustable Ball Mount That Can Be Used in Rise Or Drop Orientation for 2003 Ford F-250/F-350
Question:
Hello im looking to buy a adjustable hitch but i want to make sure im getting the right product i have measured my hitch from the receiver to the ground and i get 1 ft 7in i then measure from the coupler to the ground and get 1 ft 9in does that sound about right for a ford super duty truck and if so what do you recommend?
asked by: Weusi W
Expert Reply:
I'll start off by saying that it's a bit unusual that your Ford Super Duty truck receiver is lower than the trailer you're towing, so if those measurements are accurate then you'll need a ball mount with a 2 inch rise. If you're wanting an adjustable ball mount that can be used in a variety of rise or drop settings then I recommend using the B&W Tow & Stow 3-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black # BWTS10048B. The B&W Tow & Stow will allow you to cover up to 5" of drop or 5-1/2" of rise, and comes with 3 hitch balls to allow you to tow a variety of different trailers. I really like that you can stow the hitch balls behind the ball mount and under the vehicle, so you won't have to worry about banging your knees when loading up the truck with it still installed.
I've linked a short review video of this adjustable ball mount, as well as our entire selection of adjustable ball mounts that fit in 2 inch receivers for you to check out in case you'd like to see what the other options are.
Product Page this Question was Asked From
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- 2-5/16 Inch Ball
- Three Balls
- Steel Ball
- Steel Shank - Matte Black
- Drop - 5 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- B and W
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: B&W Tow & Stow 3-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black
- Q&A: How Does B&W Silencer Pad BWTS35020 Install
- Shop: B&W Tow & Stow 3-Ball Mount - 2.5" Hitch - 7" Drop/7.5" Rise - 18K - Black
- Shop: B&W Rubber Cover for Stowed Turnoverball
- Search Results: locking pin
- Search Results: silencer pad
- Q&A: How To Find Best Adjustable Ball Mount For 2014 Nissan Pathfinder
- Q&A: Locking Hitch Pin Recommendation for B&W Tow & Stow 3-Ball Mount BWTS10047B
- Q&A: Measurements for 10K B&W Tow & Stow 3-Ball Mount for 2" Hitches
- Q&A: Distance From Top of Receiver to Bottom of 2-5/16" Hitch Ball on B&W Tow & Stow 3" and 5" Drop
- Q&A: Distance from Hitch Pin Holes to Mounting Block for the B&W Tow & Stow 3-Ball Mount # BWTS10048B
- Q&A: Recommended Locks for B&W Stow and Go Ball Mount in Hitch
- Shop: B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5.5" Rise - 10K - Browning
- Shop: BOLT Trailer Hitch Receiver Lock for 2" and 2-1/2" Hitches - Codes to Toyota Key
- Shop: Hopkins 4-Pole Loop - 12" Long
- Shop: Fastway Trailer Hitch Receiver Lock - 2", 2-1/2", and 3" Hitches - 3-5/8" Span
- Search Results: trailer wire extension
- Shop: Trailer Wiring
- Shop: BOLT brand vehicle and hitch locks
- Shop: Suspension Enhancement
- Article: How to Measure for Trailer Hitch Drop
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Video: Choosing the Right Trailer Wiring
- Shop: Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 68149
- Shop: Fifth Wheel Hitch
- Search Results: dust cap
on Trailer Hitch Ball Mount
