What is the Correct Replacement Spring and Cable Kit for a Gorilla Lift Trailer

Question

Question:

Hi there! Is this compatible with gorila lift brand?

asked by: Eduardo

0

Expert Reply:

I have a replacement for you but the Replacement Spring Assembly for Buyers Products EZ Gate Tailgate Assist for Open Landscape Trailers # 3373015510 is not a replacement for a Gorilla Lift Trailer.

The correct replacement will be the Replacement Spring and Cable Kit for Gorilla Lift Utility Trailer Tailgate Lift Assist # GSCC-400.

expert reply by: Thomas M

0

Answer 1

The Replacement Spring Assembly #3373015510 is only available with the 2 quick links, the eye bolt, the cable, and the chain. We currently do not sell the spring individually for your EZ Gate Tailgate Lift Assist for Open Landscape Trailers…

view full answer...

Answer 2

A few of our neighbors have expressed that their tailgates are still difficult to lift after installing one of the EZ Gate Tailgate Lift Assists for Open Landscape Trailers, part #3375201000. This is most likely due to the gate being on the heavier…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The best replacement pin box for the Lippert 1621 on your Grand Design Reflection 303RLS is the Curt Flex Air. This pin boxes has an air spring and shock absorber which will reduce the back and forth chucking (stopping and taking off) and lower the…

view full answer...

Answer 5

Yes. You will have to use the Demco Hijacker Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes #DM6171 on your 2021 Grand Design Reflection 337RLS. As far as which Curt Flexair works for your trailer, it depends on what pinbox you currently…

view full answer...

Answer 6

The shortest gooseneck ball we have for the 2024 Chevy puck system is the Reese Elite Series Pop-In Ball #RP23FR. This is going to be very similar to the Curt ball you mentioned. I have included some dimensions of the Reese ball below. From the top…

view full answer...

Answer 7

The Edge Pulsar programmer and monitor part #EP54KR can give you up to an additional 136 horsepower and 291 ft lbs of torque.

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

We still recommend the use of a slider in all standard/short bed trucks. That being said, the new GM trucks like your 2022 GMC Sierra 2500 do have a slightly longer bed than the typical standard bed. The best thing you can do is to measure to see if…

view full answer...

Answer 10

You can replace the Lippert Rhino pin box on your Brinkley 5th wheel. The right one though is going to depend on the pin weight of your trailer. Here are the options that will work to replace the Lippert Rhino: - Pin Weight of 1,500 lbs - 3,500 lbs:…

view full answer...

Answer 11

Since the Rhino box only has one set of mounting bolts you'd really only be able to raise the trailer suspension like with the Correct Track tandem axle lift kit part #RR23QX or go with a lower ball like the #RP23FR like you mentioned.

view full answer...

Answer 12

The newer Chevrolet and GM pickup trucks have a known power deficiency issue with the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras #FCE48TASL-05. There is likely nothing wrong that you did, the problem is the…

view full answer...