How to Remove RV Safe RS34FR Carbon Monoxide/LP Gas Detector

Question

Question:

How do you remove the detector

asked by: Will D

0

Expert Reply:

The RV Safe # RS34FR Carbon Monoxide/LP gas detector is held to the wall using two screws. Remove the screws and you'll be able to pull the detector from the wall exposing the wiring. The red wire from the detector is connected to a 12-v power source, the black wire is connected to a ground.

I've linked to the installation instructions for you, as well as to a demonstration video.

expert reply by: Mike L

0

Wiring Diagram for RS34FR RV Safe Carbon Monoxide/LP Gas Detector
(click to enlarge)

Answer 1

You can use the RV Propane Gas Detector #RS64FR to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 2

I recommend the #RS34FR to replace your current LP gas detector. This is a simple 2 wire design making for easy installation.

view full answer...

Answer 3

We offer the 2-Wire RV Propane Gas and Carbon Monoxide Detector in black, #RS54FR or white, #RS34FR. RV Propane Gas and Carbon Monoxide Detectors are a fairly universal item and easily replaced. The additional face plates that come with the unit…

view full answer...

Answer 4

The 2-Wire RV Propane Gas and Carbon Monoxide Detector - 12 Volt - White #RS34FR has a 1 year limited warranty against manufacturers defects from the date of purchase. This does have a test feature so that you can check it even if your coach has…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The RV Propane Gas Detector part #RS64FR is what I recommend using to replace the the Atwood RV Propane Gas Detector part 31013 (Discontinued). The mounting plate for this new detector will cover up any holes you had for the previous so it will be…

view full answer...

Answer 9

We do have some LP gas detectors available, but none would be a direct replacement for your CCI 7770.2 / Pre Tell 22. From what I could find on your CCI 7770.2 / Pre Tell 22, it has dimensions of 6.25" wide x 3.9" tall. The RV…

view full answer...

Answer 10

Atwood is no longer in business so you'd have to switch over to a new brand in order to get what you need. We currently only carry the RV Propane Gas #RS44FR (white #RS64FR) which comes with two different trims (large: 7-1/4" long…

view full answer...

Answer 11

Based on what you are saying, it sounds like the detector is faulty and needs to be replaced; you did the right thing with vacuuming it and checking the batteries, as those are the two steps that need to be taken to ensure there isn't a…

view full answer...

Answer 12

Hey David, we've used the LaSalle Bristol RV Roof Vent install kit part #344270KITW to install several MaxxFan RV roof vents and it's worked well so it would also work well for you. This comes with everything needed so it would be a great…

view full answer...

How to Remove RV Safe RS34FR Carbon Monoxide/LP Gas Detector

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching