Will The Curt Universal 5th Wheel Base Rail Kit Fit A 2021 Ram 3500

Question

Question:

Can this be installed on a chasis cab?

asked by: Chuck

0

Expert Reply:

For A 2021 Ram 3500 you can use the Curt Universal Fifth Wheel Base Rails with Installation Kit - Gloss Finish # C16100 but they will require drilling into your frame so I recommend the Curt Custom Fifth Wheel Installation Kit for Ram # C16430-204 instead which is a custom fit and will drastically reduce your installation time.

expert reply by: Kevin C

0

Answer 1

It sounds like you might be bit overwhelmed with the amount of options available for your 2018 Ram 3500, which I can certainly understand! For your particular setup I highly recommend the Curt Q24 5th Wheel Trailer Hitch #C16546 along with the Custom…

view full answer...

Answer 2

Yes, the Curt Custom Fifth Wheel Installation Kit part #C16430-204 has been confirmed to fit a 2019 Ram 3500. This kit is a custom fit kit so no drilling into the frame is required.

view full answer...

Answer 3

As long as your Pullrite rail kit provides you with industry standard base rails to mount a 5th wheel hitch, the Curt A25 #C16180 will fit, since it's designed to fit in industry standard base rails. I've attached a photo of the dimensions…

view full answer...

Answer 4

In order to install a Curt fifth wheel hitch on a 2015 Ram 3500 you'll need the Curt Custom Fifth Wheel Installation Kit for Dodge Ram part #C16430-204. I don't recommend using any sort of universal kits as they require drilling into the…

view full answer...

Answer 5

Yes, you can use the same 5th wheel hitch but you will need a different installation kit for the new truck. For your new 2013 Dodge Ram 3500 long bed you can use Curt installation kit #C16430-204. This installation kit will accept the Husky 5th wheel…

view full answer...

Answer 6

I have attached a drawing from the installation instructions for the rail kit part #C16430-204 you can check out. As you can see in the attached drawing I noted the carriage bolts and where they are located on the rails when installing. Please note…

view full answer...

Answer 7

The correct Curt Custom Fifth Wheel Installation Kit for a 2020 Ram 3500 is part #C16430-204. The Curt Custom Fifth Wheel Installation Kit is a custom bolt-on fit with no cutting or drilling required into the frame. If you don't already have a…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 11

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 12

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Will The Curt Universal 5th Wheel Base Rail Kit Fit A 2021 Ram 3500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching