Replacement Lens for Optronics Trailer Taillight STL14RB

Question

Question:

ED Combination Trailer Tail Light - 6 Function - Submersible - 12 Diodes - Passenger Side Item # STL14RB I need a side replacement lens for a Optronix LED low profile boat trailer light on the passenger side similar to the one listed above

asked by: Mark T

0

Expert Reply:

For the Optronics trailer light # STL14RB the correct side lens is the part # AL17RB.

expert reply by: Jameson C

0

Answer 1

The Replacement Door for D&W Inc Super Slider Sewer Hose Storage Tubes is included in #A04-0448BK.

view full answer...

Answer 2

The LED Combination Trailer Tail Light part #STL14RB measures 8" long x 2-7/8" tall which is a standard for this type of light. It is not offered in a version that is 6" long but we do have other similar options which are, the LED…

view full answer...

Answer 3

The LED Combination Trailer Tail Light part #STL14RB for passenger and part #STL15RB for driver measure 8" long x 2-7/8" tall with mounting studs 2" on center so as long as you have room for them and the studs are either already in or…

view full answer...

Answer 4

The LED Combination Trailer Tail Light part #STL14RB would be a suitable replacement for the passenger side tail light on a 2019 Bass Tracker Trail Star Trailer. If ever needed, we also have part #STL15RB for the driver side.

view full answer...

Answer 5

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 6

The amount of bow that's put into trailer axles like the #7359765 is based on about how much a trailer is typically going to weigh that has a 3,500 lb capacity. So there's a bit of approximation and obviously it can't be totally perfect…

view full answer...

Answer 7

A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will need…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Answer 11

I recommend replacing an entire ladder if it's damaged. You'll want to find a replacement based on the height. Such as the Stromberg Carlson #LA-401 that is 99-1/2 inches tall. They can be cut shorter to customize the length if needed.

view full answer...

Answer 12

The Dexter 10K electric brakes #23-439 (right side) and #23-438 (left side) will have to be manually adjusted using the adjustment wheel below the magnet. To adjust the brakes you will use a small screwdriver or similar tool to turn the adjustment…

view full answer...