Will the Air Lift LoadLifter 5000 For 2009 Chevy Silverado 2500 Fit with an In-Bed Hitch

Question

Question:

I have a 2009 chevy 2500hd that has a pull rite superglide 5th wheel hitch that has brackets on the frame, will the airlift 5000 #89275 fit without any issues?

asked by: Joseph S

0

Expert Reply:

Yes. The Air Lift LoadLifter 5000 Ultimate Air Springs w/ Internal Bumpers # AL88275 are compatible with the brackets on your frame used for your in bed hitch rails; they'll install in different spots so there won't be any interference.

If you don't already have a compressor system to use to keep the bags filled no matter where you are, the Air Lift Load Controller Compressor System for Air Helper Springs- Heavy Duty - Dual Path # AL25856. This is a dual path system that will allow you to inflate each bag individually and it comes with analog gauges for the truck cab to allow you to keep an eye on your air pressure in each bag.

expert reply by: Erik B

0

Answer 1

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will need…

view full answer...

Answer 8

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

view full answer...

Answer 9

I really like the Curt Trailer Hitch Receiver #C14108 for your 2005 Chevy Silverado 2500HD Short Bed because it has a hidden crosstube and is a Class IV rating so it's nice and sturdy for up to 10K trailers or 12K trailers if a weight…

view full answer...

Answer 10

There are a number of differences between the Firestone Ride-Rite Air Helper Springs #F2445 and Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88299, starting with fit. While the Air Lift will fit all models of the 2018 Toyota Tundra, the…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

Here is a list of the bump stop replacements we have which fit your 2024 Ford F-350. If you can tell me how you plan to use your F-350 I can give you my personal recommendation for the option which works best for you. Timbren Front 2WD #TFF350SD2 4WD…

view full answer...