Recommended Universal Trailer Hitch For A 2007 Forest River Sunseeker 3120 On Ford Chassis

Question

Question:

Will this hitch fit a 2007 Forest River. Sunseeker model - 3120 ? It’s a Ford E450 super duty … I measured 42 inches from outside to out side on the frame where existing hitch is attached

asked by: Raymond B

1

Helpful Expert Reply:

We don't have a custom fit hitch for a 2007 Forest River Sunseeker 3120 on a Ford chassis so instead I recommend the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" # 41990-07. This hitch will fit up to a 44" frame distance for a universal fit. It has to be welded on but because of that has a maximum gross trailer weight of 16,000lbs and maximum tongue weight of 1,600lbs, which is far above other universal hitches. In your question you mentioned "where existing hitch is attached" so I wanted to confirm that you don't already have a hitch installed. If you do you will not be able to add on the # 41990-07 until you remove your current hitch.

expert reply by: Kevin C

1

Answer 1

When it comes to installing a trailer hitch on your 42 inch wide minibus I recommend The Adjustable Width Trailer Hitch Receiver for RVs, 22 inch to 72 inch Wide #13703. The trailer hitch has a high-gloss black powder coat finish that resists rust,…

view full answer...

Answer 2

I do have a possible solution for you but there are no custom fit hitches designed for converter Ford E-series vans. What you could use is a weld-on hitch. I have included a link to the weld-on hitch options we offer. The issue is that the bodies…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

I have a solution for you that I can provide, but we aren't going to have a custom fit hitch to fit a vehicle like what you referenced. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body…

view full answer...

Recommended Universal Trailer Hitch For A 2007 Forest River Sunseeker 3120 On Ford Chassis

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching