Is Rhino-Rack Pioneer Platform RR36QX All That is Needed For 2019 Toyota RAV4

Question

Question:

2022 Rav4. Is this RR36QX the only hardware I would need?

asked by: Joseph F

0

Expert Reply:

You are 100 percent correct, the only thing you will need for your 2022 Toyota RAV4 with flush-mounted rails is the following:

- Rhino-Rack Pioneer Platform Rack with Backbone Mounting System # RR36QX

This comes with everything you need to install it on your '22 RAV4.

expert reply by: Kyle S

0

Answer 1

I suggest the Curt Roof Mounted Cargo Basket #C18115 for your 2021 Toyota RAV4. If you have factory crossbars you need to ensure they do not exceed 3" wide x 1-5/8" tall, please measure verify this before ordering.

view full answer...

Answer 2

Yes the Malone FoldAway-5 Kayak #MAL38FR does fit factory crossbars that are 3-1/2 inches wide like your wife's car.

view full answer...

Answer 3

We definitely have a crossbar setup for your vehicle if you do not have fixed mounting points on your 2022 Toyota RAV4. For that system, I recommend the SeaSucker Monkey Bars #298-SX6000B. Since the Monkey Bars attach with vacuum mounts onto your…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hey HPA, I would go with the Air Lift kit part #AL64VJ that fits your 2019 Toyota RAV4 based on what you described and your needs. This gives you adjustable support that you can tailor as needed so that you get the exact amount of support you need…

view full answer...

Answer 9

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 10

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

The Thule Hullavator Pro, part #TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those…

view full answer...