Do You Have Any Tie-Downs I can Use for My Front Pucks on My 2018 RAM 2500 with Prep Package?

Question

Question:

I want to use the front puck for a tie down so I will have a 4 point tie down. Do you have anything I can use in the front puck holes for tie downs. 2018 Ram 2500

asked by: Dan L

0

Expert Reply:

If you are looking for front puck tie-downs, the best bet is the Curt Safety Chain Loops for Factory Ram Underbed Gooseneck Trailer Hitch # C60617. I confirmed with Curt that these should work with your front pucks as well.

expert reply by: Bob C

0

Answer 1

The difference between the Curt #C94ZR and the Curt #C60617 is the material that the two anchors are constructed from; while they will both fit in the rear pucks on your 2018 Ram 2500, the 2021 and newer Ram HD trucks have upwards of 36,000-lbs…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…

view full answer...

Answer 7

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 8

The TireMinder i10 TPMS #TM38FR refreshes every 6 seconds. You will get a visual and audible alert when the monitor receives the signal from your tire sensor is either below your pressure or the temperature exceeds the maximum setting.

view full answer...

Answer 9

We aren't manufacturers of those parts, and we don't have the testing ability in house, so I reached out to a couple of our manufacturers to see what information they could provide to try and help. I reached out to my contact at Curt…

view full answer...

Answer 10

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Do You Have Any Tie-Downs I can Use for My Front Pucks on My 2018 RAM 2500 with Prep Package?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching