Fuse Location for Accessory Outlet on a 2004 Ford F-250

Question

Question:

Can you tell me which fuse controls the accessory outlet on a 2004 F2 50

asked by: Spike

0

Expert Reply:

I have attached a diagram of your interior fuse box. You are looking for the fuse in position number 12. It is a 20 amp fuse like the ones you would find in the Standard Fuse Kit - 5 Amps to 30 Amps - 60 Pieces Item # PT52FR. I found this information in the online version of the owner's manual for your truck so you will want to verify this with your copy of the owner's manual.

I have included a link to our fit guide for your 2004 F-250 in case you have any other towing or accessory needs. If there is anything else I can help you with let me know.

expert reply by: Jerred H

0

ford f-250
(click to enlarge)

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 6

The correct rail kit you need for your Demco Hijacker Autoslide part #DM8550040 to fit your 2016 Ford F-350 is the part #DM8552000-71.

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 8

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 9

For your 2018 Ram 2500 with the factory puck system the best 5th Wheel Hitch is the B&W OEM Companion. If you have the 8 foot bed then you will want the fixed 25K #BWRVK3600 and if you have the short 6-1/2 foot bed you will need the 20K Slider…

view full answer...

Answer 10

Your current Greystone Fireplace WF2613R is a 26 inch wide curved fireplace which can easily be replaced with the Greystone 26" Electric Fireplace with Crystals - Recessed Mount #324-000069 as this is the same size. Install would not be…

view full answer...

Answer 11

Short answer, yes you can convert from 30amp to 50 amp. It will be costly and require an electrician. Long answer, you will need to replace the power outlet with SmartPlug RV and Marine Power Inlet - 50 Amp - Stainless Steel #SM79FR. Then replace the…

view full answer...

Answer 12

Yes, in order to set your trailer up for use with shore power you will first need an AC distribution panel. For this, I recommend a Progressive Dynamics Series AC Distribution Panel. In order to bring power into the panel you will also need a power…

view full answer...