bing tracking image
Q & A Icon

Troubleshooting Solera Smart Arm 12V Power Awning  

Question:

our awning stopped working because the outside controller got wet. I bought the replacement switch from you and I have replaced the controller. I have lights and both the inside and outside switches work have power..... sort of........... in order to change the outside sensor I had to manually lower the awning via the 7/16 bolt manual operator on the right control arm. When I replaced the outside controller the motor starts to turn and then stops, it makes maybe a quarter turn and then unwinds. The outside switch turns the lights on but will not retract or extend the awning. Also, the wind sensor does not light up. The inside switch starts to retract and then the motor is winding but the awning is not moving.

0

Expert Reply:

It sounds like you have replaced the Controller and Touchpad Assembly, # LC717666 for your Solera Smart Arm 12V Power RV Awning, # LC517517 due to moisture issues but are still having problems with function. Please note the attached snippet and follow these actions in attempt to reset.

- Press touchpad extend button.
- Press touchpad retract button.
- Press touchpad light button.
- Press touchpad wind button.
- Hold touchpad unlock button for 10 seconds.

You may also be looking at the need to replace the motor, Solera Power Awning Replacement Motor, # LC266149.

expert reply by:
0
Michael R
557691_001
557691_001
(click to enlarge)

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>