Could Torklift StableLoad and RAS System Fit Together on 2015 Ford F-150

Question

Question:

Can the torklift stableload A7310s be used in conjunction with the RAS?

asked by: Darren

0

Expert Reply:

The Torklift Stableload part # TLA7310S will physically fit with the RAS system part # RAS3611-YHD that fits your 2015 Ford F-150 as they two kits would not interfere with each other. If you have the RAS system maxed out and are wanting even more support I'd be worried that you'd be over the capacity of the truck.

expert reply by: Jameson C

0

Answer 1

The RoadActive Suspension Custom Leaf Spring Enhancement Kit #RAS3611-YHD will provide a more stable ride on your 2018 Ford F-150. Since this system is active as soon as you install it on your F-150 it does not require the additional load to compress…

view full answer...

Answer 2

The TorkLift StableLoad Suspension Upgrade #TLA7310S that fits your 2017 Ford F-150 is more of an upgrade for ride quality, and wouldn't do a great deal to help with sag. There is an option that will help tremendously with sag, however, which is…

view full answer...

Answer 3

There are a few different options for your 2017 Ford F-150. In my opinion I would go with Item #TLA7310S. These are going to be the easiest to install and use. When towing and you add weight, the spring pack flattens which then your overload spring…

view full answer...

Answer 4

Both the TorkLift #TLA7310S Stainless StableLoad and the RAS #RAS3611-Y would absolutely help with the body roll in turns, porpoising and sway caused by crosswinds. Both systems are very highly rated by our customers. I'd agree that air helper…

view full answer...

Answer 5

The TorkLift StableLoad Suspension Upgrade #TLA7310S that you referenced basically allows the overload springs of the vehicle suspension to engage sooner to gain additional suspension support whereas the RoadActive Suspension kit #RAS4611 basically…

view full answer...

Answer 6

I recommend to use the Timbren Suspension Enhancement System - Rear Axle part #TFR350SDJ which will give you more stability to reduce rear sag. The springs provide the additional support under heavier loads that your factory suspension cannot…

view full answer...

Answer 7

If you're looking to add some suspension enhancement that can be disengaged without completely uninstalling it then I recommend going with the TorkLift StableLoad which is available with the standard powder coat #TLA7310 or as stainless steel…

view full answer...

Answer 8

The RoadActive Suspension Leaf Spring Enhancement Kit #RAS3611-YHD you were looking at is confirmed to fit your 2018 Ford F-150 XLT 4WD Crew Cab Short Bed. This kit provides up to 3000lbs of load leveling support which can be changed when installing…

view full answer...

Answer 9

I can help you figure out which RoadActive Suspension Kit will work best for your 2013 Ford F-150. Since you mentioned that you tow about 3500 miles a year I recommend the RoadActive Suspension Custom Leaf Spring Enhancement Kit #RAS3611-Y which…

view full answer...

Answer 10

I had the #TLA7310S pulled from stock, and found that the thickness of the spacers that sit between the lower overload spring and the bottom of the spring pack is 7/8 of an inch which is the same for the fronts and rears. I've linked to an…

view full answer...

Answer 11

If your weight distribution system is set up properly, and you're using the correct system whose capacity can handle the fully loaded tongue weight of your trailer, you shouldn't still have a much of a problem with the rear suspension…

view full answer...

Answer 12

For your 2019 Ford F-150 Extended Cab 4WD with the 6-1/2' bed I recommend the RoadActive Suspension Custom Leaf Spring Enhancement Kit #RAS3611-Y as its 2000lb load capacity is more than enough for the 1200lbs you are planning on adding to your…

view full answer...

Could Torklift StableLoad and RAS System Fit Together on 2015 Ford F-150

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching