Recommended Lift Kit For 2019 Keystone Cougar 367FLS

Question

Question:

Hello I have a 2019 KEYSTONE COUGAR 367FLS, I am looking for a lift kit for the same. Do yall offer one?

asked by: Robert B

0

Expert Reply:

I wasn't able to confirm this but it looks like your 2019 Keystone Cougar 367FLS has 7000-lbs tandem axles, so you can get 2-1/4 inches of lift by using the Correct Track Trailer Alignment and Lift Kit # RR23QX you were looking at. This is a really easy solution that elongates the hangers in your leaf spring suspension system to lift the trailer and is the best available option.

I've linked a review video of this kit for you to check out, as well.

expert reply by: Erik B

0

Answer 1

Yes, the Torflex Lift Kit #K71-725-02 is the correct one to use on your 5th wheel trailer with tandem #12 Dexter 7K Torflex axles. This kit will provide an additional 3-1/8 inches of rise and will help level out your trailer so it isn't nose…

view full answer...

Answer 2

The D44 on your axle tells me that you have a Dexter D44 axle, which has a 4400 lb capacity. Given that, and the length of the leaf spring you provided, the etrailer #e28SR would make for a good replacement spring. Increasing the capacity of your…

view full answer...

Answer 3

I attached a picture that shows the proper position of shackles and equalizers on trailer suspension. Sometimes the shackle will flip up but if you jack up the trailer by the axle that's got the shackle flipped you can usually get it to flip back…

view full answer...

Answer 4

When changing the size of the equalizer that is on a trailer, this will affect the size of hangers needed or the spacing of the hangers. For example, if you were to go with an equalizer that is one inch taller, you could keep the center hanger the…

view full answer...

Answer 5

Normally if the equalizer is tilted like what you have typically it's because the trailer is not sitting level. The side tilted up is typically pointed down towards the ground. It's hard to see in your picuture but it almost could be the case…

view full answer...

Answer 6

The first and easiest thing you should check is that the trailer is being towed level. If the trailer is nose high or low that can cause the equalizers to not sit level. You will need to select the correct rise/drop ball mount so that the trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 9

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 10

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...

Answer 11

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…

view full answer...

Answer 12

I have attached for you below some common torque values needed for a trailer suspension system but a lot of these will vary by bolt size and other factors. U-Bolts: Varies by Size - 1/2" bolts: 45 ft/lbs - 70 ft/lbs, 9/16" bolts: 65 ft/lbs…

view full answer...