Does the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers Come with Bolts for the Hangers

Question

Question:

Leaf spring bolts. Is there a kit with zerk fittings for the opposite end of the leaf spring? Opposite of the Equalizer

asked by: Jerry

0

Expert Reply:

The Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers part # K71-449-00 does not come with eye bolts for the leaf spring side which is attached to the hanger. That said, all you would need to do to obtain these is simply purchase four additional bolts, if you prefer wet then you can use part # 126B2.

expert reply by: Conner L

0

Answer 1

I can help you determine the right replacement 6,000 lb double-eye leaf springs for your trailer, though we don't have any way of knowing what specific ones that trailer needs and I couldn't find a reference to the part you mentioned.…

view full answer...

Answer 2

You are correct saying that the leaf spring can stretch a bit over time, and it sounds like that is exactly what happened; you need a 26" (eye to eye) double-eye leaf spring. I recommend going with the 6-Leaf Double-Eye Spring for 6,000-lb…

view full answer...

Answer 3

Thanks for the photo. You will not have any issue using the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs #K71-449-00 and moving the equalizer bolt down to the lower hole position. This will work very…

view full answer...

Answer 4

You will want the Dexter Heavy-Duty Suspension Kit #K71-449-00 as it matches the 7-3/4" equalizer size your trailer currently has. The 33" and 35" axle spacing is a general guide but it is best to replace based off the size of your…

view full answer...

Answer 5

I spoke with Dexter and there is actually no maximum axle capacity for the Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs #K71-449-00. With that being said, there will be no issues using this with 16k , or…

view full answer...

Answer 6

I recommend going with the Dexter Heavy-Duty Suspension Kit #K71-449-00 on your trailer. This will have another 7-3/4" wide equalizer versus only the 5-3/4" wide one you get in the Kit #K71-359-00. Both kits will give you the shorter…

view full answer...

Answer 7

The difference is the length of the equalizers that come with the kit. The part #K71-449-00 comes with equalizers that are 7-3/4 inches from eye to eye whereas the part #K71-359-00 has equalizers that are 2 inches shorter at 5-3/4 inches.

view full answer...

Answer 8

All of the tandem axle hanger kits for double-eye springs use 2-5/8 inch or 2-1/4 inch long shackle straps. The length is taken from the center of one eye to the center of the other eye. The overall length of a 2-5/8 model is just under 3-1/2 inches.…

view full answer...

Answer 9

The Dexter Heavy-Duty Suspension Kit #K71-449-00 comes with 8 bushings for the 4 leaf springs. The included equalizers will already have bushings pressed in. You might also consider upgrading to the Dexter E-Z Flex Suspension Kit #K71-653-00 with the…

view full answer...

Answer 10

I don't have any information as to what leaf springs are on any one particular trailer such as a 2007 Jayco Jay Flight 29BHS but if they are double eye leaf springs which are the most common then we should have a Dexter Heavy-Duty Suspension Kit…

view full answer...

Answer 11

From what I can find, for 5200 lb axles you will want 29.5 inches between the hangers center to center and 33.25 inches axle center to center for double eye springs in most cases. Your equalizers and shackle straps will take up some of that…

view full answer...

Answer 12

If you measured your old springs and they were 25-1/4 inches when worn out you'd most likely need to move your hangers to replace them with the part #e94SR. Now with that said looking at your pictures it does look like your shackle angles are…

view full answer...

Does the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers Come with Bolts for the Hangers

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching