What are the Seat Stem Dimensions of the Rhino-Rack Bike Frame Adapter Bar for Women's and Alt Frame

Question

Question:

Hello, It states that the seat stem max dimension is 1 - 1/5inch , what is that ? 1 - 1 and a half inches. Thanks

asked by: Jeff M

0

Expert Reply:

The Rhino-Rack Bike Frame Adapter Bar # RRRBCA021 has a 2" diameter for the head stem (by the handle bars) and a 30mm measurement at the seat stem. Which translates to approximately 1.2" which can be represented as 1-1/5th". That measurement is large enough to fit the most commonly found seat stems.

expert reply by: Scott S

0

Answer 1

The Rhino-Rack Bike Frame Adapter Bar #RRRBCA021 is sized to work best on bikes that have a handlebar to seat post distance of 23 to 29-inches. But since we offer these adapter bars from many makers we can find one for you that will better fit the…

view full answer...

Answer 2

We have heard that the buttons of the Thule Bike Adapter bar part #TH982XT can be pretty difficult to press. A coworker of mine has this adapter and has reported the same thing. I wish there was a trick to it that would make it easier, but there…

view full answer...

Answer 3

The reason that you can't use the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes #HLY74FR on the back of your 5th wheel is due to the suspension and the excessive movement that occurs at the rear of the trailer. Since the axle is…

view full answer...

Answer 4

We definitely have a perfect rack that works! From my available specs on your Radwagon 3 e-bikes, they have a 50-1/2 wheelbase and weigh 73 pounds. They also have 2.3" wide tires. If these specs match the bikes you have, I recommend the…

view full answer...

Answer 5

There is one superb option to carry your RadWagon Electric Cargo Bike, which is definitely a unique bike, with a wheelbase of about 50 inches and weighing in at over 70 lbs. With those specs the best bike rack for your RadWagon is the Hollywood Racks…

view full answer...

Answer 6

The Hollywood Racks Sport Rider SE, part #HLY84FR, should be able to handle your two RadWagon 4 e-bikes. It can handle up to 80 lbs. per bike. Since your e-bikes weigh 77 pounds alone, you'll need to weigh them with the baskets attached to make…

view full answer...

Answer 7

You can use the Hollywood Racks Sport Rider SE Bike Rack #HLY84FR for your RadCity 5 Plus bike but you'll also need an adapter bar like part #HRBA-PRO so the ratcheting arm has something to make contact with to secure your bike. Since the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...