Draw-Tite VS Curt Class III Receiver

Question

Question:

I have a 1997 Lexus LX450 with the Draw-Tite Class III receiver installed. It has been there for quite a while and is has rusted so I thought it was time to replace it. I would like some information on Draw-Tite vs Curt for the class III receiver. Currently the receiver is primarily used for carrying a load and for tow straps / recovery straps in a 4x4 recovery setting. May be used for actual trailer towing but not very often. My second question, if I do switch over to the Curt receiver, would it utilize the same holes that the Draw-Tite is currently using for installation? Thanks.

asked by: Kurt S

0

Expert Reply:

I will answer your second question first. The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", part # C13089 and the Draw-Tite Max-E-Loader Trailer Hitch Receiver - Custom Fit - Class III - 2", part # 41015, will utilize the same holes for installation. Both of these hitch receivers are rated has Class III. The specs are the same for the maximum tongue weight and maximum tow weight. They have the same maximum tow and maximum tongue weight, except when used with weight distribution. If using weight distribution, you should use the Draw-Tite hitch receiver since it is rated to carry slightly more in those instances. .

i have included product description links below.

expert reply by: Mark Smith

0

Answer 1

For your I recommend the Curt Class 3 Hitch #C13089. This has the 2" receiver that you are looking for. The hitch is rated for carrying up to 500 lbs of tongue weight, so more than enough for your 150 lb mobility scooter and whatever carrier you…

view full answer...

Answer 2

The Reese and Draw-Tite products are manufactured by the same parent company, this means that the #26102 and #26002, Dual Cam Sway Control systems are the same, but there is a difference in the generations of the systems. The older systems had Hanger…

view full answer...

Answer 3

There is a slight difference between the etrailer Trailer Hitch Receiver #e98869 and Curt Trailer Hitch Receiver #13241 that fits your 2020 Nissan Frontier, which is the finish. The etrailer hitch has a rugged matte black finish which is really good…

view full answer...

Answer 4

The Curt Trailer Hitch Receiver #C13282 fits all models of the 2019 Lexus RX 450h, including your F-Sport. The instructions don't go into as many details as they do with the Curt that fit the previous generation, but they do have a section…

view full answer...

Answer 5

There is just a single difference between the Curt and etrailer trailer hitches that fit your 2023 Dodge Durango, which is the finish. The Curt has a glossier finish than the matte black finish of the etrailer hitch, so you can choose which you…

view full answer...

Answer 6

The trailer hitch I highly recommend for your 2019 Lexus RX 450h is the Curt #C13282 because it is easier to install than the other trailer hitch that fits your '19 RX 450h and it also has a concealed crosstube so your Lexus will keep its clean…

view full answer...

Answer 7

The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13282 is compatible with 2016 - 2020 Lexus RX 450h. There is not currently a fit for the 2018 Lexus RX450HL model from any of our manufacturers. If you are looking for another way…

view full answer...

Answer 8

Both the Curt #C13382 and the etrailer #e98912 hitch are a 2" Class III hitch receiver that will provide a maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs. You are correct, they are an identical hitch but our…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...