Is Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-464-465 Enough For One Axle Assembly?

Question

Question:

IS YOUR PART NUMBER 23-464-465 FOR ONE AXLE ASSEMBLY? ONE RIGHT AND ONE LEFT CORRECT?

asked by: Ryan

0

Expert Reply:

You are correct.

The Dexter Nev-R-Adjust Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7K # 23-464-465 includes both the left and right side braking assemblies so it will be everything you need for one axle.

I included a video of the # 23-464-465 for you to take a look at.

expert reply by: Samuel C

0

Answer 1

The brake assemblies you have are Dexter 12 inch assemblies with a 7k capacity. That means the current part numbers you would want are #23-464 for the left hand side and part #23-465 for the right hand side. The part #23-464-465 that you referenced…

view full answer...

Answer 2

Your Dexter axle under your 2019 Jayco North Point 377RLBH will use the Dexter Electric Trailer Brake Kit #23-180-181 for both the left and right brake assemblies. For your hub you will need the Dexter Trailer Hub & Drum #42866UC3-EZ. This will…

view full answer...

Answer 3

The part number you are in need of is the part #RG06-070 which includes two 10-36 seals that match the dimensions you mentioned exactly.

view full answer...

Answer 4

The correct replacement for the Dexter Trailer Brake Assemblies 023-464-00 is the Dexter Nev-R-Adjust Electric Trailer Brake Kit part #23-464-465.

view full answer...

Answer 5

As long as your 5000lb axle uses 12" x 2" brakes like a typical 5200-7000lb axle then the stronger 7000lb brake assemblies will fit just fine. They will provide stronger braking, but that is not necessarily better. If you can adjust your…

view full answer...

Answer 6

The recommended lug nut torque for your 7,000lb axle depends on a few factors like wheel size, stud size etc. Check out the attached photo which shows the torque specs for a variety of applications. I see you were looking at the Dexter Nev-R-Adjust…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Based on the GVWR of your 2019 Jayco North Point 315RLTS it does seem like you have 7k axles. I recommend verifying this information to be sure. These axles typically use the #14125A outer and #25580 inner bearing found in the Timken #TMK92VR.…

view full answer...

Answer 9

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 10

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 11

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Answer 12

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...