Vehicle Bulb Out Sensor Goes Off When Towing a Trailer with LED Lights
Question:
I have installed this kit on a shorelander jet ski trailer and the brake lights work fine went I use the turn signal they do not work I get a buld out warning on my dash but lights are on and brake lights work any sugestions on what could be wrong it is wired as per instructions I aslo have another trailer i pull and have not had a problem with it It is only this trailer
asked by: Dave P
Expert Reply:
The bulb out sensor indicates that you may have a BMW, Volkswagen, Porsche, AUdi, or other German vehicle. These vehicles have a problem when towing a trailer with LED trailer lights. The problem is what you have described. The LED lights do not draw enough power (in this case it is just the blinkers) and it makes the vehicle think there is a bulb out.
The fix is to use a special adapter, # C35FR, which will eliminate this problem because it adds load resistors that increase the draw on the system. (This will work even if you do not have a German vehicle, it is just that this problem first occurred with those vehicles.)
If your vehicle does not have a 7-Way connector and you cannot use this adapter, you will need to install load resistors on the brake/turn light wires on the trailer. You can use # DI34ZR. I have linked installation instructions for you.
If you have a 7-Way trailer connector but the trailer does not have a 4 or 5-Way flat trailer connector like the adapter requires, then there are 2 options. First, if the trailer has a 7-Way you can wait for the forthcoming 7-Way to 7-Way adapter coming out soon that works the same way as the adapter described above. Or, you can install load resistors on the trailer wiring.
Products Referenced in This Question
Load Resistor Kit for LED Turn Signals - 50 Watts - 6 Ohm - Qty 2
- Accessories and Parts
- Trailer Lights
- Load-Resistor Kit
- Diamond
more information >
Product Page this Question was Asked From
7-Way to 4-Way/5-Way Trailer Adapter for Vehicles with Lamp-Out Sensors Towing Trailers with LEDs
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 7 Round - Blade
- Plug Only
- 5 Flat
- 4 Flat
- CURT
more information >
Continue Researching
- Shop: 7-Way to 4-Way/5-Way Trailer Adapter for Vehicles with Lamp-Out Sensors Towing Trailers with LEDs
- Shop: Pollak 7-Way to 12 Volt Power Outlet Adapter
- Q&A: Bulb-Out Sensor in 2015 Mercedes ML350 Goes Off When Towing Trailer w/ LED Taillights
- Q&A: Will LED Trailer Adapter # C35FR Allow Trailer With LED Taillights Function
- Shop: Trailer Wiring
- Shop: 7-Way Trailer Adapter for Towing Trailers with LED Lights
- Shop: Load Resistor Kit for LED Turn Signals - 50 Watts - 6 Ohm - Qty 2
- Video: Review of Diamond Lights - Load Resistors - DI34ZR
- Shop: Optronics Trailer Clearance and Side Marker Light - Submersible - Rectangle - Amber Lens
- Search Results: 7 pin adapter led
- Search Results: tr20141
- Search Results: lamp out sensor
- Q&A: Trailer Lights Won't Work on 2011 Mercedes-Benz GL on Trailer With 4-Way
- Q&A: Recommended Trailer Wiring For A 2016 Volkswagen Tiguan
- Shop: Pollak 7 Pole to 4 Way Connector Adapter
- Shop: Demco Spare Tire Mount for up to 4" Trailer Tongue - Silver
- Search Results: pk12716
- Search Results: 7 pin to 4 pin
- Video: Hopkins Wiring - Trailer Connectors - HM47910 Review
- Video: Review of Curt Wiring - Wiring Adapters - C35FR
- Video: Demco Spare Tire Carrier Review
- Video: Review of Curt 7-Way LED Trailer Light Adapter - C57003
- Article: Trailer Wiring Diagrams
- Q&A: How to Install LED Light Bulb Load Resistor for Use with Trailer with LED Lighting
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: 44649
- Video: Choosing the Right Brake Controller