What Model Number Do I Need to Purchase the Thule EasyFold XT Bike Rack?

Question

Question:

What is the difference between the four model numbers? I looked at photos and specifications and cannot see the difference. I am ready to make a purchase I just do not want to make a mistake.

asked by: GEORGE K

0

Expert Reply:

If you are looking to purchase the current model of the Thule EasyFold XT Bike Rack for 2 Electric Bikes - 1-1/4 and 2 Hitches - Frame Mount, the correct model number for that particular rack is # TH903202.

If you provide the year/make/model of vehicle you have as well as the hitch size (if you have one), I would be happy to confirm with you if the EasyFold XT will fit your vehicle.

expert reply by: Bob C

0

Answer 1

It sounds like you're worried about your camper van's license plate being visible while having the Thule EasyFold Xt, part #TH903202, equipped. If that is your concern, then Thule has you covered. The EasyFold has an integrated holder…

view full answer...

Answer 2

The Thule Easyfold XT Bike Rack for 2 Electric Bikes - 1-1/4" and 2" Hitches, part number #TH903202, will fit your bikes. The rack clamps to your frame so you will not have to remove your fenders. It also comes with a ramp to ease…

view full answer...

Answer 3

Yes, the Thule EasyFold XT Bike Rack for 2 Electric Bikes #TH903202 does fit 1-1/4" and 2" receivers. Locks are included to secure the bike rack to the hitch receiver, along with securing the bikes to the carrier. I attached a…

view full answer...

Answer 4

Yes. The Thule EasyFold XT #TH903202 is designed to work with step through frames and step over frames just the same. This is a great solution for e-bikes with fenders since it mounts the bikes by the frame and not the wheels, so it's ideal…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...