Are the Wires of the Wesbar 4-Pole Flat Connector Color Coded

Question

Question:

Just curious if this product had 4 color coded stranded wire

asked by: Jim B

1

Helpful Expert Reply:

The four wires of the Wesbar 4-Pole Flat Connector # W787264 that you referenced are color coded by the standard 4-way colors.

White is the ground, brown is the tail light, green is right turn and stop and yellow is left turn/stop.

The wire is also stranded and not solid core.

I attached an FAQ article on trailer wiring for you to check out also.

expert reply by: Jameson C

1

Answer 1

The Hopkins Replacement Multi-Tow 6-Way and 4-Way Trailer Connector part #40965 is a fit for the 2019 Nissan Titan. It plugs into the OEM connector near the spare tire. I have attached a photo for your reference.

view full answer...

Answer 2

We can help you get your 2000 Grand Vitara ready for flat towing behind your motor home that has a 6-pole round type connector. We do not have a single adapter product that fits your requirements to convert a 6-pole round RV connector to a 4-pole…

view full answer...

Answer 3

For your 2013 Dodge Durango with factory 7-way which uses the standard US Car connector wiring, you can use the Hopkins Replacement Multi-Tow 6-Way and 4-Way Trailer Connector #40965 you referenced. It will plug right into your factory wiring and…

view full answer...

Answer 4

The Hopkins Replacement Multi-Tow 6-Way and 4-Way Trailer Connector #40965 is meant as a replacement for a similar factory-installed trailer connector. Since your 2012 Explorer did not have the factory tow package installed your installation for a…

view full answer...

Answer 5

There is no difference between the #37175 and the 47175, it's the same exact part. Our part number for the Hopkins 4 pole to 6 way trailer connector adapter is #37175, and Hopkins uses 47175 as the part number.

view full answer...

Answer 6

You have a couple of options. If you want to change out your wiring completely, I recommend the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit #119250KIT. This will give you the quick…

view full answer...

Answer 7

With your trailer having the different colored wires you are going to need to identify each wire function to know exactly what wires to connect your new 4-Way #W787264. This 4-way uses white for ground, brown for running/clearance lights, yellow for…

view full answer...

Answer 8

The vast majority of tailgate light bars like the Rampage SuperBrite LED Tailgate Light Bar part #RA960134 come with a wiring harness that has a built-in trailer connector so you can plug them into the the rear of the vehicle without splicing. If you…

view full answer...

Answer 9

The Westin Fey Diamondstep Rear Bumper - Black Powder Coated Steel #61000 does have room to make a cutout for your trailer wiring. It does not come with the cutout for wiring. It comes with the cutout for the license plate light on each side that do…

view full answer...

Answer 10

LED lights don't typically draw very much amperage, but since you will be installing 20 of them on one circuit the best option is to use a heavier gauge wire like 10 gauge part #10-1-1 (sold by the foot). With 10 gauge wire you could run all of…

view full answer...

Answer 11

Your trailer wiring is pretty standard in colors so it would be pretty easy to wire up a standard 4-way to it. The colors would mainly match but where you have a yellow/beige you'd just run the solid yellow to it and the green/beige would get the…

view full answer...

Answer 12

The Hopkins Endurance Easy-Pull 4-Pole Connector #HM48044 is a 4 foot long vehicle side 4-way trailer connector. It isn't exactly like the Wesbar #W787264 but it is the opposite end and the same length so it will work for you.

view full answer...