Length of Curt MV Weight Distribution Spring Bars

Question

Question:

What is the total overall length of the Spring Bar?

asked by: Jason

0

Expert Reply:

The Curt MV weight distribution system spring bar lengths like the # C17073 are 31.67 inches.

expert reply by: Jameson C

0

Answer 1

In order to determine the correct replacement or upgraded spring bar for a Curt Weight Distribution System you need to know if you have the standard like part #C17002 or MV like part #C17052. The head for each is a bit different so you should be able…

view full answer...

Answer 2

The Blue Ox SwayPro Weight Distribution w/ Sway Control #BXW1006 and the Blue Ox SwayPro Weight Distribution w/ Sway Control #BLU66FR are identical aside from different shanks included in each kit. The #BXW1006 uses a shank that can be adjusted from…

view full answer...

Answer 3

Using spring bars that are overrated for the total tongue weight of your trailer can cause a pretty rough ride but other wise would not actually harm anything. If you notice the rough ride then replacing your spring bars with one that are rated for…

view full answer...

Answer 4

The diameter of the Curt spring bar #C17071 that you referenced is 1-1/2 inches and the length is 30-5/8 inch. Since you have the 600 lb TW MV Curt system this for sure is the correct spring bar and wouldn't require measuring to verify.

view full answer...

Answer 5

The length of the spring bars on the Curt MV Weight Distribution System - Round Bar - 14,000 lbs GTW, 1,400 lbs TW #C17057 is 30-5/8 inches. These are the same bars, #C17074. We do not have this weight distribution system available without the…

view full answer...

Answer 6

I reached out to my contact at Curt and confirmed the fit for your measurements. We have 3 different capacities available with the dimensions you gave. These bars come as an individual part and you will need to make sure you have the correct matching…

view full answer...

Answer 7

So long as the total tongue weight of your fully loaded 2022 Forest River Surveyor is between 600 lbs and 800 lbs, you can use the lower rated spring bars with the hitch head of your Curt MV Weight Distribution System - Round Bar - 10,000 lbs GTW,…

view full answer...

Answer 8

Yes, the lower rated Replacement Spring Bar #C17073 can be used to replace the spring bars on your Curt MV Weight Distribution System #C17063 using the existing head. This will convert the system so that it's tongue weight capacity range is 800…

view full answer...

Answer 9

The Replacement Spring Bar for Curt MV Weight Distribution System #C17074 you referenced will not work with your EAZ-Lift 1,000-lb Weight Distribution System. Neither manufacturer will confirm if their parts are interchangeable with that of a…

view full answer...

Answer 10

The Curt MV Weight Distribution System part #C17062 is composed of the following parts: Curt Spring Bar Retainer Package for Round Bar Style Weight Distribution part #17109 2-5/16" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank -…

view full answer...

Answer 11

Both the Curt #C17052 1000 lb system and the #C17057 1400 lb system use the same weight distribution head and ship with the same shank that offers a maximum rise of 6 inches or a drop of up to 2-1/2 inches. The #C17052 is recommended for trailers…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Length of Curt MV Weight Distribution Spring Bars

Product Page this Question was Asked From

Continue Researching