Does Yakima Fullback Trunk Mounted Bike Rack Fit on 2018 Hyundai Ioniq

Question

Question:

Does this work on the Hyundai Ioniq? I cannot find any photos of the rack on the Ioniq hence I am a little unsure.

asked by: Alfred

0

Expert Reply:

Yes we have confirmed with Yakima that the FullBack 3 bike rack part # Y02633 is a confirmed fit for your 2018 Hyundai Ioniq. I attached a picture that shows this rack installed on an Ioniq just like yours as well.

expert reply by: Jameson C

0

Fullback Installed on Ioniq
(click to enlarge)

Answer 1

I have another option for you to carry your bikes, but unfortunately there is not a trailer hitch receiver confirmed to fit your 2019 Hyundai Ioniq EV due to the differences in the rear of the vehicle to accommodate the batteries. Instead I recommend…

view full answer...

Answer 2

To install the Yakima FullBack Bike Rack, part #Y02634 or #Y02633, you need to use the anchor mode to accommodate the glass door/trunk on your 2019 Hyundai Ioniq. These instructions are a few pages long and I've linked the complete instructions…

view full answer...

Answer 3

You can definitely carry a bike with your 2020 Hyundai Ioniq plug-in, but trailer hitches, including the one you referenced, require specific frame mounting points as well as the room needed under the vehicle for a hitch to mount. An Ioniq plug-in…

view full answer...

Answer 4

Yes you can install a trunk-mounted bike rack on your 2021 Hyundai Ioniq. There is a 2-bike rack Yakima FullBack #Y02634 or a 3-bike rack #Y02633, both of which are confirmed to fit. The FullBack features a 4-strap mounting system and interlocking…

view full answer...

Answer 5

The Yakima FullBack trunk mount bike racks have been confirmed to fit your 2022 Hyundai Ioniq: FullBack 2-Bike - #Y02634 3-Bike - #Y02633 I personally like the FullBack better simply because it comes with the bike and rack locks. Aside from that and…

view full answer...

Answer 6

You bring up a great point with the rear glass of your 2018 Hyundai Ioniq and how it would affect the install of the Yakima Fullback part #Y02634 that you referenced which is why Yakima states that the hooks need to be put in anchor mode which is a…

view full answer...

Answer 7

Are the mounting hooks attached to the glass? Kind of. The hooks will actually be ran inside the vehicle as shown in the diagram I've provided for you. The procedure is explained in more detail in the installation instructions beginning on pages…

view full answer...

Answer 8

Thanks for the pictures I found all three. Most trunk mount bike racks are not confirmed to fit the 2017 Hyundai Ioniq I guess because of the funky style hatch it has. The only rack we carry confirmed to fit is the Yakima FullBack, part #Y02634. I…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Does Yakima Fullback Trunk Mounted Bike Rack Fit on 2018 Hyundai Ioniq

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching