2022 Hyundai Ioniq Best Trunk Mount Bike Rack

Question

Question:

Do you have a bike rack that you KNOW will fit a 2022 Hyundai Iconiq? Thank you!

asked by: Sharon A

1

Helpful Expert Reply:

The Yakima FullBack trunk mount bike racks have been confirmed to fit your 2022 Hyundai Ioniq:

FullBack
2-Bike - # Y02634
3-Bike - # Y02633

I personally like the FullBack better simply because it comes with the bike and rack locks. Aside from that and the color these bike racks are virtually the same. You will want to position the bottom of the rack 2-3/8" above the top of your bumper and set the hub to "2" for your installation. Yakima also states to use the anchor mode. I'm attaching my installation video of the FullBack on a 2020 Audi Q7 so you can get my thoughts on the bike rack as well as a demonstration of what the anchor mode is.

Currently (March 2022) these are the only trunk racks that fit your Ioniq, but even if there were other options I would have a hard time recommending something else based on price-point and features.

expert reply by: Jon G

1

Answer 1

Yes you can install a trunk-mounted bike rack on your 2021 Hyundai Ioniq. There is a 2-bike rack Yakima FullBack #Y02634 or a 3-bike rack #Y02633, both of which are confirmed to fit. The FullBack features a 4-strap mounting system and interlocking…

view full answer...

Answer 2

Yes we have confirmed with Yakima that the FullBack 3 bike rack part #Y02633 is a confirmed fit for your 2018 Hyundai Ioniq. I attached a picture that shows this rack installed on an Ioniq just like yours as well.

view full answer...

Answer 3

I have another option for you to carry your bikes, but unfortunately there is not a trailer hitch receiver confirmed to fit your 2019 Hyundai Ioniq EV due to the differences in the rear of the vehicle to accommodate the batteries. Instead I…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

2022 Hyundai Ioniq Best Trunk Mount Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching