How Large of a Rail Will the Jif Marine Pontoon Boat Mirror with Mounting Bracket Fit

Question

Question:

for the item: Jif Marine Pontoon Boat Mirror with Mounting Bracket - 8inch Wide x 4-1/2inch Tall - Aluminum Item # JIF72FR What size railing does the mounting bracket could fit on?

asked by: Anthony

0

Expert Reply:

The Jif Marine Pontoon Boat Mirror with Mounting Bracket part # JIF72FR will fit any size rail up to 1-1/4".

expert reply by: Conner L

0

Answer 1

The Jif Marine Pontoon Boat Mirror with Mounting Bracket part #JIF72FR is a universal fit mirror. It is designed to simply clamp onto the railing of a pontoon boat trailer. If you have this railing on your trailer then it should work well for you.…

view full answer...

Answer 2

I recommend #CM01877. This mirror has the height required to get up and over the obstacles that are typically on the rails of tritoons and pontoons. It has the convex mirror face to give a nice wide field of view saving your neck from trying to look…

view full answer...

Answer 3

The CIPA Pontoon Boat Mirror #CM01877 that you referenced has actually been re-designed and it no longer requires a lock pin for securing the mirror into its various positions. This is now accomplished using the tightening knob on the unit, which is…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, you are going to also need the Demco Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes #DM6171 when using the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040 with your Road Armor pin box. For a suspension enhancement I…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, the Curt Custom Fifth Wheel Installation Kit for Ford #C93WR will work just fine with the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040.

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

How Large of a Rail Will the Jif Marine Pontoon Boat Mirror with Mounting Bracket Fit

Product Page this Question was Asked From

Continue Researching