Weight Of The Curt Q24 5th Wheel Trailer Hitch w/ Slider for Ford Towing Prep Package

Question

Question:

What's this hitch weigh?

asked by: Rick

0

Expert Reply:

The Curt Q24 5th Wheel Trailer Hitch w/ Slider for Ford Towing Prep Package - Dual Jaw - 24,000lbs Item # C16545-16020 weighs 281lbs. The head weighs 111lbs and the base/slider is 170lbs.

expert reply by: Kevin C

0

Answer 1

Yes, we have options available for you to attach a receiver hitch to your 2021 Keystone Raptor 5W Toy Hauler. But before ordering, I suggest you determine if your 5th wheel's frame is rated for this. I suggest contacting your salesperson or the…

view full answer...

Answer 2

The B&W Companion OEM 5th Wheel Trailer Hitch w Slider for Ford Towing Prep Package - Dual Jaw - 20K #BWRVK3370 you were looking at weighs in right at 250lbs. You will want to have a buddy help you when installing the hitch in your truck as it is…

view full answer...

Answer 3

Total weight for the B and W Patriot Slider hitch part #BWRVK3270 is 221 lbs. The slider base on it's own weighs 169 lbs and the head weighs 52 lbs.

view full answer...

Answer 4

The B&W Patriot 5th Wheel Trailer Hitch #BWRVK3270 that you referenced weighs 220 lbs total. It comes apart in a few sections though to make install and removal a bit easier. I attached a review video for more info on the hitch as well.

view full answer...

Answer 5

To drop the front of the pin box and thus lower the front of the fifth wheel, you'd need to RAISE the pin box, not lower it. Lowering the pin box would raise the height of the fifth wheel at the front. If you have an available set of holes at the…

view full answer...

Answer 6

A fixed fifth wheel hitch is what you are going to need in order to tow your Grand Design with a rotating pin box, the Lippert Turning Point. Rotating pin boxes should not be used with any type of adapter to ensure stability and a solid connection,…

view full answer...

Answer 7

When adjusting the height of a pin box such as #LC1191191 it is important to support the pin box when removing the bolts. I recommend 2 or 3 buddies to give you a hand and make sure no one is beneath the pin box while raising or lowering it. With the…

view full answer...

Answer 8

The front (toward the cab) of B&W Patriot 5th Wheel Trailer Hitch w/ Slider, #BWRVK3270, will set 53" from tailgate end of the bed. If your 6-1/2' bed is a true 78" length this provide 25" between the hitch and front of the…

view full answer...

Answer 9

You are going to need a sliding hitch with the short bed on your 2018 Ford F-250 Super Duty, as well as one with height adjustment in order to A) not have your trailer make contact with your truck's cab on tight turns and B) tow level and have…

view full answer...

Answer 10

I do not recommend enlarging the holes to move the pin box up higher since it takes a lot of pressure and will most certainly move up when you hit a rough patch of road and end up pinching the trim. You would need to cut out the trim and walls around…

view full answer...

Answer 11

There are a few lift kits available, but they are all for very specific Torflex model torsion axles so you'll first need to verify what you have on the trailer. #10 Torflex axles with 2,300 to 4,000-lb capacities - Torflex Lift Kit - 2-5/8"…

view full answer...

Answer 12

The B&W Companion OEM 5th Wheel Trailer Hitch w/ Slider #BWRVK3370 for your 2019 Ford F-250 has a total weight of about 265 pounds. Keep in mind though that the head on this particular hitch is really easy to remove so that you can lift the hitch…

view full answer...