Can the Thule Hull-A-Port Be Used on an Adarac Truck Bed Rack on a GMC Canyon

Question

Question:

I have Adarac racks on my truck bed GMC Canyon will the Hull-A-Port work?

asked by: Kaet

0

Expert Reply:

Yes. You can use the Thule Hull-A-Port Kayak Carrier w/Tie-Downs - J-Style # TH834 on an Adarac truck rack when you use the Thule Xadapt3 Xsporter Load Bar Adapter for the Hullaport # THXADAPT3.

expert reply by: Erik B

0

Answer 1

Yes. The Rhino-Rack Nautic Stack Kayak Carrier part #RRS520 will work with an Adarac Truck Bed Ladder Rack like the Pro Series Custom; you will need to use the integrated channels in the crossbars with the t-bolts that come with the carrier.

view full answer...

Answer 2

We've got exactly what you need! If you want standard J-Style cradles you can use the Thule Hull-A-Port Kayak Carrier w/Tie-Downs #TH834 but you will need the Watersports Adapter #THXADAPT11 to fit this to the T-Tracks on your Adarac Pro ladder…

view full answer...

Answer 3

The Thule Compass Kayak and SUP Carrier w/ Tie-Downs - J-Style #TH890000 will actually fit Adarac ladder racks such as #A4000965 that you referenced. You do not need any adapter or conversion kit as this kayak carrier will simply clamp onto the…

view full answer...

Answer 4

Yes we do have sliding ladder racks that fit your 2022 Ford F-350 with the part #TH43003XT-000 for if you have a long bed or the part #TH43003XT-785 for if your truck is the short bed version.

view full answer...

Answer 5

I have a possible solution for you. First, though, there isn't an above-the-bed ladder rack available for the 2020 Ford F-250 Super Duty 8-ft bed that is designed to have a quickly removeable crossbar system. Still, the one I have in mind is a…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 10

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 11

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 12

I'll start off with the ski rack for your 2024 Jeep Grand Cherokee Laredo since that is fairly simple. I recommend the Rhino-Rack Ski and Snowboard Carrier #RR574. This is capable of holding 4 pairs of skis, has an aluminum construction for…

view full answer...