Comparing EZ Flex and MORryde Cushioned Equalizers for RV

Question

Question:

im looking at the two equalizer systems for my 2020 sundance trailer. I sone product better than the other and why?

asked by: Matt S

0

Expert Reply:

I'd recommend the Morryde cushioned equalizers over the EZ Flex since they have vertical cushioning whereas the EZ Flex cushions horizontally so the ride quality isn't as improved as much. So I'd go with the part # MR87ZR for sure over the # K71-652-00.

expert reply by: Jameson C

0

Answer 1

Yes, the Dexter E-Z Flex Suspension Kit part #K71-652-00 will work on a Lippert 6K trailer axle. That said, you do need to confirm the spread is 33" (center to center) first.

view full answer...

Answer 2

You definitely can replace the MORryde suspension system on your 2011 Carriage trailer with the Dexter E-Z Flex Suspension System, like part #K71-652-00, as they both install on a hanger like the part #28-5. From what I can tell it looks like the…

view full answer...

Answer 3

Typically the way to fix grease fitting that won't take grease is to have them removed and cleared so that the obstruction is removed and it will function. What you will want to do is remove the zerk fittings of your equalizers with a wrench and…

view full answer...

Answer 4

The shackle straps of the #e99ZR are shorter at 1-3/4 inches than what you have now but that wouldn't be an issue. The slight length change would not be a problem.

view full answer...

Answer 5

Finding the correct MORryde equalizer kit will be pretty specific, so I cannot tell you which will be correct without knowing the wheel spacing and axle capacity, unfortunately. With that being said, if you have the trailer's VIN, you may be able…

view full answer...

Answer 6

The Road Armor Shock Absorbing Equalizer Kit part #LC696740 will work great on a Grand Design Imagine Travel Trailer if you switch to longer shackle straps with the Lippert AP Kit part #LC52SV which also has heavy duty shackle straps and wet bolts.…

view full answer...

Answer 7

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 8

Yes, axle spread and wheel base by definition are the same measurements. You will measure from the center of one axle to the center of the 2nd axle to determine what you axle spread is. This may be difficult as some wheels and covers will make this…

view full answer...

Answer 9

The absolute best cushioned equalizer that fits the dimensions you mentioned having would be the MORryde ALLTREK 4000 part #MR89DR as this is only option to provide vertical and horizontal cushioning. This would make a big difference and you'd be…

view full answer...

Answer 10

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…

view full answer...

Answer 11

You will measure the MORryde Suspension Upgrade Kit for Tandem Axle Trailers #MR76ZR from the center of each hole on the shackle strap.

view full answer...

Answer 12

Hey Patrick, so for your leaf spring upgrade I am going to need to know a couple of things before I can get you over to the right part. Specifically, the length from eye to eye, the spring width, leaf thickness, and the number of leaves. From here I…

view full answer...

Comparing EZ Flex and MORryde Cushioned Equalizers for RV

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching