How Much Does the etrailer Hitch for 2013 Mazda CX-5 Weigh

Question

Question:

Hi there, I am interested in getting the e98902 trailler for my mazda cx-5 diesel. What is shipping weight for it?

asked by: LMwangi

0

Expert Reply:

The etrailer Trailer Hitch Receiver part # e98902 which is a fit for a 2013 Mazda CX-5 weighs around 34 lbs.

expert reply by: Conner L

0

Answer 1

The wiring for the 2019 Mazda CX-5 can be installed after the etrailer.com hitch part #e98902. The etrailer.com Class III hitch is a 2" hitch with a matte black so it will look nice on the Mazda. I have attached a helpful installation video…

view full answer...

Answer 2

Both the Tekonsha T-One Vehicle Wiring Harness #118746 and the Curt T-Connector #C56377 are designed to fit your 2019 Mazda CX-5, and will install in the same manner by plugging into existing ports behind the trim panels in the vehicle's…

view full answer...

Answer 3

The etrailer Trailer Hitch Receiver #e98902 and Curt Trailer Hitch Receiver #C13315 are nearly identical with the exception being the matte powder coating on our hitch as opposed to the gloss powder coating used on the Curt. I prefer the matte as it…

view full answer...

Answer 4

That's a good question because the differences can certainly be subtle. The 2" trailer hitches that fit your 2019 Mazda CX-5 are the Draw-Tite Trailer Hitch Receiver #76138, etrailer.com Trailer Hitch Receiver #e98902, and Curt Trailer Hitch…

view full answer...

Answer 5

The pricing of a hitch and and the installation can vary based on the manufacturer and the location where you get the hitch installed. I recommend going with the etrailer Trailer Hitch Receiver #e98902 for your 2020 Mazda CX-5 because it gives you…

view full answer...

Answer 6

The hitch is rated independent of the vehicle so with the 2014 Mazda CX-5 owners manual specifying a lower 200 lb capacity, that will be the max capacity including the carrier weight. The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black…

view full answer...

Answer 7

You do not have to use a stabilizer strap with the Draw Tite hitch part #e98902 that you referenced. At one point the lower capacity Curt hitches did require the strap but here recently they decided that wasn't needed any longer. So if you wanted…

view full answer...

Answer 8

The Curt #C13315 and the Draw Tite part #76138 for your 2019 Mazda CX-5 are both really great options that would both work great for you, but if I had to pick one over the other I would go with the Curt as it is a little less visible at the rear of…

view full answer...

Answer 9

The etrailer Trailer Hitch Receiver #e98902 you were looking at for your 2021 Mazda CX-5 Turbo Carbon Edition weighs in at 34lbs, and the #C12170 weighs in at 32lbs. Between these two I would still go with the #e98902 even though it is 2lbs heavier,…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...