Recommended Trailer Hitch for 2020 Chevy Traverse

Question

Question:

Wich model do i get

asked by: Esteban

0

Expert Reply:

For your 2020 Chevrolet Traverse I recommend the Curt # CU29FR. This is a great choice for both towing and accessories.

If you're going to be towing a trailer I recommend a wiring harness like part # 118287 and a ball mount that has the correct rise or drop that fits with your trailer.

expert reply by: Charles S

0

Answer 1

For a 2021 Chevy Traverse we have two trailer hitch receivers, the etrailer Trailer Hitch Receiver #e56YR and the Curt Trailer Hitch Receiver #CU29FR. Both have the same maximum gross trailer weight capacity of 5,000lbs and maximum tongue weight…

view full answer...

Answer 2

The Curt and the Draw Tite hitch for your 2019 Buick Enclave are similar enough that it would not be worth it to go with the higher priced version. They both fit and install the same and allow the rear bumper cover to install over the hitch when not…

view full answer...

Answer 3

For your 2021 Chevy Traverse the hitch I would recommend for use with a hitch step is the etrailer part #e56YR as it's the best priced, fits behind the trim panel of the vehicle so it can be hidden when not in use, and doesn't have trailer…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Based on my research it does look like the 2018 Chevy Traverse is equipped with blunt cut wires beneath the dash for installing a trailer brake controller as part of its standard package. To be certain of this you can visit a local Chevy dealer with…

view full answer...

Answer 6

For your 2018 Chevy Traverse I recommend the Tekonsha T-One Vehicle Wiring Harness #118287 if you need a 7-Way connector or the Tekonsha #118761 if you need a 4-Way connector. These are both custom harnesses that will install by simply plugging into…

view full answer...

Answer 7

I recommend the Curt Class III Max Frame Receiver Hitch part #CU29FR for the 2020 Chevrolet Traverse because of its concealed cross tube design it provides the best ground clearance compared to the other options. The concealed cross tube design sits…

view full answer...

Answer 8

Your 2020 Chevy Traverse is prewired for a brake controller. Instead of a connector, there are 4 blunt cut tow package wires located under the dash below and behind where the headlight switch is located. These wires will directly connect with the…

view full answer...

Answer 9

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Answer 10

There are two main trailer hitch options for a 2020 Chevrolet Traverse, the Draw-Tite Max-Frame Trailer Hitch Receiver part #76184 (see photo one) and the Curt Trailer Hitch Receiver part #C13380 (see photo two). The main difference between the two…

view full answer...

Answer 11

Yes, the rear access panel on a 2019 Chevrolet Traverse can be reattached after the Curt Trailer Hitch Receiver part #CU29FR is installed. Therefore, there will be no signs a hitch is present with this cover installed as no other part of it is…

view full answer...

Answer 12

The only significant difference between the Draw-Tite #75528 and the Curt #13424 is the capacity. Since both of these far exceed the towing capacity of your vehicle that really doesn't make a difference. If I were to recommend a hitch for your…

view full answer...

Recommended Trailer Hitch for 2020 Chevy Traverse

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching