What Are the Specs of the Charger for the Replacement Battery Pump for Airbedz

Question

Question:

Is input 120V AC?? and is 12V DC on the output??

asked by: SHUTARO K

0

Expert Reply:

The PPI-AC7 Replacement Battery Pack for Air Beds Rechargeable Battery Pump # 341025 takes your 110v/120v household electrical feed and turns it into DC current to charge the 12v DC battery. I've linked a photo of the specs on the plug for a reference and it is not recommended that a charger from another product be used as it may damage the battery.

expert reply by: Erik B

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

Hey Michael, thanks for reaching out! The Timbren Active Off-Road Bumpstops #T28GR you installed on your 2018 Ford F-150 unfortunately have that reputation among users (although Timbren claims their systems provide a smooth ride). Because of this we…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

Yes, the Replacement Cover #PE48UV will indeed fit the 2018 Ford F-150 extended cab with the 67" bed. This is made to be a replacement cover for the Pace Edwards JackRabbit Retractable Hard Tonneau Cover #311-JRFA05A28 which is specifically for…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

The 2" receiver for the EcoHitch item #EH87SR sticks out right through the middle of the air dam. I have attached a picture below that will show you what this front hitch looks like once installed. The EcoHitch Hidden Front Mount Trailer Hitch…

view full answer...

Answer 9

I spoke with my B&W representative who confirms that to install their GNRK1121 #BW77FR Turnover Ball hitch on a 2021 Ford F-150, the center of the 4 inch hole for the gooseneck ball would be placed 42-5/8 inches forward of the rear edge of the…

view full answer...

Answer 10

Shackle bolts have a nut that needs to get held with a wrench or socket while tightening them down. If you didn't use a wrench or socket when you initially installed the shackle bolts you could go back now with one so that you can tighten them…

view full answer...

Answer 11

In order to attach the Rhino-Rack Pioneer Platform to a set of crossbars you would need the kit that comes with universal mounts which is part #RR42114BF for 48" long x 37" wide or part #RR42115BF for 58" long x 47" wide. This…

view full answer...

Answer 12

There is no plug-in wiring adapter for a brake controller on a 2019 Chevy Colorado; most brake controllers such as the Prodigy P3 #90195 will need to be hardwired into the vehicle. For this you can use the Replacement Brake Control Plug-In Harness…

view full answer...

What Are the Specs of the Charger for the Replacement Battery Pump for Airbedz

Product Page this Question was Asked From

Continue Researching