RV Roof Vent Recommendation

Question

Question:

Someone smashed my roof vent on my cargo trailer I’m measuring 13x13.25” from frame to frame do you haxe anything that will fit?

asked by: Joseph D

0

Expert Reply:

The smallest roof vents we carry are 14" x 14" in size. If you are willing to alter the cutout hole to fit that then I recommend the MaxxAir Mini Deluxe Trailer Roof Vent w/ 12V Fan - Powered - 1 Speed - Black Item # MA00-03851. It has a vent cover that will allow the vent to be open in all weather and will protect against bugs and debris. It also comes with LED lights and the exhaust fan is quiet and energy efficient.

expert reply by: Kevin C

0

Answer 1

It will indeed work; I just checked with Lippert for you and was able to verify the correct toggle switch for your Lippert Power Stance Electric Trailer Jack #LC69VR (which is the 813748), is the following: - Replacement Extend/Retract Switch for…

view full answer...

Answer 2

Hey Paul, we have a Blue Ox base plate kit that fits your 2024 Nissan Versa with the part #BX1856. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle.…

view full answer...

Answer 3

The MaxxAir Mini Deluxe Trailer Roof Vent part #MA00-03851 once installed will sit almost flush with the ceiling. The panel which houses the light and control knob I would say is around 1/4" - 1/2" thick so that is all that would sit inside…

view full answer...

Answer 4

With a few possible exceptions (large fifth wheels that use LT or Light Truck Tires), we recommended that only trailer tires be used on trailers because they have stiffer sidewalls which do a better job dealing with the vertical load tires experience…

view full answer...

Answer 5

The black top of the MaxxAir Mini Deluxe Trailer Roof Vent w/ 12V Fan #MA00-03851 is just under 4 inches tall so with the white base and black top combined, it will sit about 4-1/8 inches above the roof. I've attached a video to help with some of…

view full answer...

Answer 6

Although I would not be able to speak on the installation of the part(s) you received for your trailer, I can tell you that the TremPro 644 Silicone Sealant part #0160297 will do an excellent job of sealing your new aluminum panel to the trailer and…

view full answer...

Answer 7

GM does not supply the attaching nuts required to secure the wires to the studs. These can be obtained locally. You will need (1) M6 x 1.0 nut, #185916 and (1) M8 x 1.25 nut, #185917. I have attached an FAQ for you that may also help.

view full answer...

RV Roof Vent Recommendation

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching