How to Reset Furrion RV Television

Question

Question:

My tv is not bringing up the set up wizard. How can I use the remote to start the set up process?

asked by: Greg

0

Expert Reply:

For Furrion TVs the way to enter the setup wizard is to perform a hard reset. To do that you'd unplug the TV, hold down the power button for a minute (weird, I know) and then plug TV back in and press power button once.

expert reply by: Jameson C

0

Lori H.

11/2/2021

When using the menu button, I can't select "channel" in order to switch from air to cable.

Reply

Les D.

11/3/2021

@LoriH Since this is a "universal" remote" not all features will be named the same. When you go to menu, do you have a selection marked "Source" or "Input"? This is what most TV name this function. Also, if you have the input set to HDMI or USB (instead of Cable or TV (OTA) you may not be given the option for that change. Let me know if this helps. If not we will dig a little deeper.

Reply

Answer 1

If you get the Out of Stroke error message on the Lippert Ground Control system, such as #LC358590, then that indicates that the jack has extended as far as it will go and cannot go any further. To clear the error you can extend all of the jacks in…

view full answer...

Answer 2

If you get the Out of Stroke error message on the Lippert Ground Control system, such as #LC358590, then that indicates that the jack has extended as far as it will go and cannot go any further. You might be able to solve this issue by raising the…

view full answer...

Answer 3

The Lippert Ground Control 3.0, #LC358590 does have a manual mode that lets you move each jack individually. The out of stroke error does not only mean the jack has reached it's maximum stroke but it can also indicate there was a high amp…

view full answer...

Answer 4

To perform a hard reset on your Furrion television you will first unplug the TV. Then you will hold the power button down for one minute. Release the power button and then plug back in the TV. After you plug in the TV you will press the power…

view full answer...

Answer 5

Other than replacing the T.V there is not much else that can be done, however before you go and replace the unit, I recommend trying one more thing. What you're going to want to do is unplug the T.V from power for approximately 60 seconds,…

view full answer...

Answer 6

There are a number of reasons why your Furrion Unismart Universal Remote Control #FR34FR may be having issues after you changed the batteries. If you take a look at the cut out of the linked installation instructions I added you can see the…

view full answer...

Answer 7

If you've ensured that your battery contacts are good and not obstructed or dirty, and the batteries don't need to be changed, then I recommend replacing the entire remote with the Furrion Unismart Remote Control #FR34FR.

view full answer...

Answer 8

I reached out to my contact at Furrion who said that if your Furrion Remote, like part #FR34FR, isn't working even after replacing the batteries then there are 2 other things you can try. First off inspect the contacts where your batteries…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 12

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

How to Reset Furrion RV Television

Product Page this Question was Asked From

Continue Researching