Reese Sidewinder Replacement Compatibility For A Reese Sidewinder SW19KIN Pin Box

Question

Question:

I have a 2019 3790RD Montana and want to replace the pin box with a Reese Sidewinder 5th Wheel King Pin with Rotating Turret - Lippert 1716 - 20,000 lbs Item # RP77FR That you have listed for sale will this bolt up to my 5th wheel?

asked by: Barton C

0

Expert Reply:

Yes, the Reese Sidewinder 5th Wheel King Pin with Rotating Turret - Lippert 1716 - 20,000lbs Item # RP77FR will replace your previous Reese Sidewinder SW19KIN Pin Box.

expert reply by: Kevin C

0

Answer 1

The Trailair Rota-Flex 5th Wheel Pin Box #LC328329 you linked to is a fit for the 1621 bolt pattern pin boxes so it will not fit your Lippert Rhino Box, but you have three other options that will. The first option is the MORryde Cushioned 5th Wheel…

view full answer...

Answer 2

The Trailair Flex Air 5th Wheel Pin Box - Lippert Rhino - 21,000lbs Item #LC65VR is exactly what you're looking for to replace your Lippert Rhino pin box.

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 7

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 8

So for your set up, a 2021 Ram 2500 short bed with the RamBoxes, you will need to use a Sidewinder in order to have the clearance to tow a 5th wheel. The Goose Box doesn't move the pivot point and an offset ball just won't be enough for…

view full answer...

Answer 9

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 10

There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at the: -Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 This 5th…

view full answer...

Answer 11

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 12

The B and W Patriot slider is the only hitch unfortunately that can't be adapted to fit the OEM rails of your 2024 Ram 2500 as none of the adapters can work with it. So Mike what that means is that no matter how you slice it...it's time for a…

view full answer...